Piping Draftsman

Looking for a challenging position in a dynamic & reputable organization, where I can utilize my experience & knowledge in the field of Piping Designer using PDS / Microstation / Autocad

M/s JGC-DESCON ENGINEERING (Pvt.) Ltd (1st July, 2004 To date)
As a Sr. Draughtsman:
Responsibilities are, Design/drafting the Piping Layouts, Details, Isometric, Material Take-off from isometrics, route selection for lines and proper selection of support / support location and using AutoCAD, PDS, CADPIPE etc.
Has worked on the following Major Projects:
Mari Gas Test Separator Skid
· Piping, Equipment Modeling Utilizing PDS Software
· Checking Layout Piping Plans, Isometrics, As-per P & ID. Drawings, Mech. Data sheets & Vendor documents.
· Isometric checking for final MTOs

Tie-In Iso’s for EPC3 (Nigeria) Project
Isometric checking to issue for construction & final MTOs.

GAD'S for BONNY River Terminal Project (Nigeria).
Checking of GAD's utilizing the PDS/SPR softwares.

Rabigh Development Project (MTO)
Prepared Mto and Conceptual Layout for bidding purpose.

ATYRAU REFINERY RECONSTRUCTION (Republic of Kazakistan)
· Checking Layout Piping Plans, Isometrics, As-per P & ID. Drawings, Mech. Data sheets & Vendor documents.
· Isometric checking for final MTOs on Smart Plant Review.

· DOLPHIN PROJECT UPSTREAM AND COMPRESSION FACILITIES (Ras Laffan Qattar)
· Piping Modeling Utilizing PDS Software
· Checking on Smart Plant Review
· Isometric checking to issue for construction & final MTOs

· REHMAT DEVELOPMENT PROJECT
· Piping Plans, utilizing CADPIPE.
· Isometric checking to issue for construction & final MTOs

M/S ICI POLYESTER FIBER LIMITED April 2000 to June 2004
44 KTPA Expansion Project.
5.5 KTPA Expansion Project
Job responsibility
· Site Modification raised by the Operation. Process department.
As given p&id and general guide line,
· As built Piping Plan, Isometric System & Mechanical drawings,
· Site surveying to prepare all as built work,
M/s Engineering Kinetics (Pvt.) Ltd. (Sep. 1998 to March 2000)
Provides design / engineering, consultancy and site supervision services to Refineries, Pipelines/Gas and Oil gathering system & Gas Processing Industries
As a Site Supervisor.
Has worked on the following major projects:
PARCO Mid-Country Refinery Project.
Soda Ash Refurbishment Project.
Gadoon Power Plant
I was also posted at PARCO Refinery as a Site Supervisor. Responsible for look after Site activities like fabrication and installation of piping and Mechanical work.

Academic Qualification
Passed Matriculation Examination From Fasial Abad Board 1990
Three Year Apprenticeship Training in Mech. Draftsman 1991-1994
Trade, from Pakistan Engineering Company LAHORE.
Three Month course of AutoCAD from University of The Punjab. 1994
AutoCAD 2005 From Engineering Systems. 2005
In House Training
· Four months training for PDS (Plant Design System) software in JGC-DESCON Engineering (Pvt.) Limited.
· Safety awareness course from Marubeni’s Safety Department. 2000

Academic Qualification
Passed Matriculation Examination From Fasial Abad Board 1990
Three Year Apprenticeship Training in Mech. Draftsman 1991-1994
Trade, from Pakistan Engineering Company LAHORE.
Three Month course of AutoCAD from University of The Punjab. 1994
AutoCAD 2005 From Engineering Systems. 2005
In House Training
· Four months training for PDS (Plant Design System) software in JGC-DESCON Engineering (Pvt.) Limited.
· Safety awareness course from Marubeni’s Safety Department. 2000

SUMMARY
About 11+(Years) experience in piping engineering and allied fields. Principal experience has been related to Process Piping engineering and Oil & Gas field. Assignments have included Designing, Drafting, Development of Plot Plan, and Preparation of Plant piping layouts with sectional details, Steel structure, Development of Equipment Layouts, Development of piping system (Piping Isometrics including Bill of Material), Material Take-off. For Preparation of Contract Documents/Procurement. Site surveying to take Dimensions. For Piping Routing/Designing,
As built work of all type of Process Plants & wellheads , Cranes, Textile Machinery, Polyester Fibre Machinery (Godet Rolls etc.). Bill of Qountity, Reference Codes and standards following (ASME, API, DIN & BS etc.).

· At ICI my job responsibilities was to design and drafting of Piping (independently) thru FCP (field change procedure) given by operation, maintenance and engineering department using Auto CAD.
· At Pak-Arab oil Refinery (PARCO) .Did supervise the erection of Fired Heaters, Tubing, Stacks & Ducts.
· In piping section of JGC-DESCON preparation of Isometrics, Piping Plans, Pipe Supports, MTOs, BOQs.
· In Piping Manufacturing Industry Did supervise the manufacturing of Pipes, End Beveling, Hydro testing, & coordination with Inspection Teams of SNGPL, ASIAN Inspection Services, SGS.