Lead QA/QC Engineer

(2) Carrying out Corrosion Mitigation System Using Cathodic Protection Method (3) Inspection of Risers, Wellhead areas and Offshore Facilities. Ultrasonic Survey of Pipelines, Tanks and. Vessels. Isometric Drawing of Process Lines.

Post N.Y.S.C Experience with dates
Oceaneering Int. Ltd (Nov.1995-Till date)
Clients: Mobil Producing Nigeria Unlimited Project: Mechanical Integrity Survey
Position: Lead Project Engineer
Responsibilities: (1) Planning Project execution with collaboration with the client representative
(2) Carrying out Corrosion Mitigation System
Using Cathodic Protection Method
(3) Inspection of Risers, Wellhead areas and Offshore Facilities. Ultrasonic Survey of Pipelines, Tanks and. Vessels. Isometric Drawing of Process Lines.

Elf Nigeria Limited.
Position: Project Engineer.
Project: Leak Repair on Rumuekpe Ogbagi Delivery Line
Responsibilities: Dye Penetrant Inspection, Ultra-Sonic Thickness Measurement and Holiday Detection


Texaco Overseas Limited
Position: Senior Welding Inspector.
Project: Construction of 6’’ &10’’ Lines at Pennington
Responsibilities: Visual Weld Inspection, Radiographic Films Interpretation, Coating Inspection and Holiday Detection

Shell Petroleum Development
Company of Nig:
Position: Assistance Project/Corrosion Engineer
Project: Topside Inspection of Platforms and Facilities (Eastern Division)

Responsibilities: Visual Inspection of Flow lines, Vessels, Risers and other Facilities. Coating Inspection and Holiday Detection.
Inspection of structural welding Joints using Magnetic particles Inspection (MPI).


(b) Willisco Nig. Ltd. Warri. (Nov. 1992 to Feb-1995)

Position: Senior Welding Inspector
Project: N.N.P.C Pipeline & Deport Project, Phase iii Contract
Responsibilities: Main Line Weld Inspection, Tie-In Inspection, Procedure Qualification Test, Welders Qualification Test, Radiographic Film Interpretation, Field Joint Wrapping and Field Coating Repairs Inspection.

(c) Allied Inspection Services Ltd Port Harcourt (1990 to Oct. 1992)
Position: Senior Welding Inspector
Project: Installation of Generators, Ultrasonic Thickness Monitoring of Pipelines, Tanks and Vessels Inspection.
Client: Elf Nigeria Limited Portharcourt
Responsibilities: Controlling the Quality of work done in accordance with a given Specification Radiographic Film Interpretation, Drawing Interpretation and preparation of Reports.

Institution attended With dates:
University of Ilorin 1983- 1988
St. Patrick’s Sec. Sch Oka 1978- 1982
St. Peter’s Primary School Oka 1972-1978
Qualifications Obtained With dates:

B.Eng. Mechanical Engineering (2nd Class Lower Div 1988)
West African School Certificate 1982 1982)

Professional Qualification:
ASNT level 1, Ultra Sonic Testing (1999) Oceaneering Sponsored.
ASNT Level 2, Radiographic Film Interpretation (1993) Willisco Sponsored.
ASNT Level 2, Magnetic/Dye Penetrant Inspection. (1997) Oceaneering Sponsored.

Short Courses attended with dates:
Vibration Monitoring in Maintenance Management, organized by the Nigerian Society of Engineer Engineers (1991)

ASNT leveland2, Ultra Sonic Testing (1999) Oceaneering Sponsored.

(d) Beavakon consultants Limited, warri (1989-1990)
Position: Mechanical Vibration Engineer
Project: Establishment of Vibration Base Line for Rotating Equipment.
Client: Nigerian Gas Company Warri & Warri Refinery and Petrochemical Company.
Responsibilities: Establishment of Vibration Base Line for Rotating Equipment Like Compressors and Turbines, Frequency Analysis of Vibration Signature or Spectra. Frequency Analysis for Predictive Maintenance and Training of Engineers on Vibration.

N.Y.S.C Experience (Aug. 1988-sept. 1989)
Company: Shell Petroleum Development Company Portharcourt.
Dept: Maintenance Department.
Responsibilities: Carried out Maintenance Work on the following: Gas Turbine, Caterpillar Engines, Pumps, and Compressors; Worked in both Flow-Stations and Gas Plants, Pre commissioning Checks on new Gas Plants and On-Condition Maintenance Using Vibration Methods.