Instrumentation Engineer Experienced in PLC ,Scada &MicroControllers

self - motivated individual,hard working.

Integrated Process Automation (IPA) November 2004– till date
Design (Control & Instrumentation) Engineer.
Installation, Troubleshooting, & Automation using PLC for Load Cell based projects.
Project undertaken
*Micro Controller based Weigh Feeder.
Project description: Here the rate of feed of materials for the making of cement has been controlled by a micro controller 89C55WD series.
*Weighing controller.
Project description: This project is utilized in the petroleum industry for the measurement and control of gasoline. For the running of this project we have incorporated the Modweigh controller which comprises of HMI and transmitter. The set parameters can be entered through this HMI and the transmitter will process the signal according the real time conditions and take suitable actions.
Software used: Inbuilt controller software.
Hardware used: MODWEIGH controller (MW 99D4)
*Weigh feeder automation.
Software used- RS Logix.
Hardware used- Allen Bradely PLC (Comprising of relay logics incorporated in the panel)
*Weigh feeder.
Project description: Here the quantity of raw materials has been precisely controlled for the production urea.
Software used: Automation Basic. (Version 2.4)
Hardware used: Beckner & Rainer (B&R) PLC, Model PP41.
*Rubber cutting machine.
Project description: Here the cutting of the rubber sheet for a specified length has been taken care by PLC which senses the feed back signal of a tachometer.
Software used: Automation Basic. (Version 2.3)
Hardware used: Beckner & Rainer (B&R) PLC, Model PP15.
*Batching system for a glass industry.
Project description: Here the necessary chemicals required for the making of glass has been quantified, mixed in certain proportions, qualifying the different stages of mixing and is delivered to the kiln.
Software used: Cimplicity Machine Edition for PLC,Cimplicity SCADA Version 6.1
Hardware used: GE Fanuc, Versamax PLC with control panel and relay logics.

BE (Electronics and Instrumentation) from TREC, Nagarcoil
University : MS University
Period of study : 1999 – 2003
Percentage : 67%

+2 from S.S.N. Senior Secondary School
University : CBSE
Year of passing : 1998
Percentage : 62%

10th from S.S.N. Senior Secondary School
University : CBSE
Year of passing : 1996
Percentage : 72%

•PLC (AB&SIEMENS)
Troubleshooting and maintenance of analog and digital controllers for process controlling using PLCs. Programming of Allen Bradley (SLC 5/02 and 5/04) using RSlogix500 and SIEMENS.
•SCADA (iFix, LABVIEW,DCS) System developments
Design and Implementation of SCADA and DCS. HMI development using SCADA software.Interfacing of data acquisition systems developed with PC cards(pcl 816 & 727) and PLCs. Configuration of different OPC servers and SCADA packages.
•Industrial Networking
Knowledge of networks for SCADA and PLCs with RS232-422-485 standards, Ethernet, Profibus and WiFi. I also got an opportunity to get in touch with CAN, FEILDBUS and BLUE TOOTH in the plant floors.
•PC Based Instrumentation
Data Acquisition system with PCL 816 and 727 cards using
Lab VIEW 7.0.Driver designing using C. GPIB and HART. Smart instrument designing using 8051micro controller.

Name : Renju Ramachandran
Father : N Ramachandran
Date of Birth : 23-01-1981
Sex : Male
Passport No : E-6436510
Passport Expiry : 18th September 2013
Languages : English, Hindi, Malayalam
Interests : Technical Reading, Music, Playing Badminton.
Permanent Address : Renjini, Chavercode, Parippally (PO), Kollam, Kerala.