electrical engineer; instrumentation& control engineer

electrical engineer; instrumentation& control engineer; field service engineer

B: EXPERIENCE:
1. From 2003 to today, I have been working for Mekong- Energy Company limited as a field engineer.
ƒç General introduction: Mekong- energy is a combine cycle power plant with 2-2-1 mode operation, two gas turbines, two boilers, one steam turbine with total capacity 715 mw. The plant has been controlled by DCS system. Bop systems include: water treatment station, pumping station, air-compressor system, HWB, ASB, SY, fire fighting system, gas reduction system, electrical distributed system(6.6 KV; 400 VAC; 230VAC; 125VDC; 48VDC)¡K
č My responsibilities:
- Took part writing operation procedure for: gas turbine, steam turbine start-up and shut-down.
- Performed monitoring and controlling the plant by Mark-V, DCS and PLC¡K.
- Made work orders from CMMS.
- Performed operation and maintenance for BOP systems.
- Supervised contractors following schedule.
- Performed prevention and correction as a Field engineer.
- Implemented defect analysis and proposed their troubleshooting.
2. From 2001 to 2003, I worked for Hiep Phuoc Power Plant as an electrical engineer.
č General introduction: Hiep Phuoc Power Plant is a thermal power plant with three steam boilers and three generators 125mw per one.
č My responsibilities:
- Performed prevention and correction maintenance for 110kv station, medium voltage system (3.3kv) and low voltage system.
- Performed maintenance and troubleshooting for excitation system.
- Performed setting and correction overhead line, bus bar, generator and transformer protection.
- Troubleshooting for power supplies for shut-off valves, motors, HVAC and other control panels¡K
3. From 1994 to 1999 I worked for Giang Vo Electronic Company as a service engineer. Five years, I had worked with electronic equipments: inverters, oscillators, digital circuits, amplifiers, televisions¡K.

6. Educational level:
+ Electronic Engineer 1987- 1992
+ Bachelor of Business Management 1994-1998.
A: TRAINING BACKGROUND:
- Gas turbine and steam turbine training course by GE.
- Speedtronic Mark V and HMI training course by GE.
- DCS training course by ABB.
- Combine cycle operation and maintenance training course by EDF.
- Safety work permits; CMMS training course by EDF.
- Gas reduction station training course by EDF.
- Water treatment training course by IONICS.
- HRSG (heat recovery steam generator) operation and maintenance training course by NEM.
- English communication skills training course by ILA Vietnam.
- Air compressor system, pumping station, condenser, HVAC, fire fighting training course by suppliers.
- 500 kv, 6.6 kv substations training course by ABB.
- Low voltage supply training course by EDF.
- Hot water boiler, auxiliary steam boiler training course by BONO.
- HSE, first aid, fire fighting system, EMS 14001 and OHSAS 18001 completed.