Plant Supervisor

Looking for copetetive oil/gas treatment work. To work in an operationally dynamic environment perform a positieve attitude towards the Health & Safety of the team and to the Environment, expierienced in control of process via DCS.

1. AGIP KCO, temporary assigned to Abu Madi plant of ENI Group & Petrobel, in the position of Plant Supervisor, Egypt, November 2007 up to present
- Provide smooth running of the LPG plant by performing a variety of process engineering duties;
- Daily/monthly reports;
- Implementing changes in plant operation;
- Trouble shooting of operating problems.
2. AGIP KCO, On job training as a Panel Operator in offshore ENI facilities, Loango field, Production Platform, Porte Noire, Congo, March 2007 – August 2007
- Monitoring and controlling oil and gas treatment and technological processes of oil recovery via distributed control system;
- Check the DCS configuration and its component parts;
- Perform diagnostic and supervision of system;
- Check the process control function.
3. AGIP KCO, on job training in Karachaganak Process Complex, Aksai, Kazakhstan, November 2006 - February 2007
- Keeping process of condensate treatment at normal operating conditions;
- Check the process variables and inform about any abnormal situations;
- Adjustment of valves, regulators, instrument and other equipment installed on the plant.
4. AGIP KCO, On job training in ENI Facilities, Venice refinery, Italy, September, October 2006
- Configure DCS for preparing plant and equipment for maintenance turndown.
5. AGIP KCO, On job training in ENI Facilities, Ravenna Power plant, Italy, November 2006
- Training on steam generating facilities.
6. AGIP KCO, On job training, concerning control room activities in a plant producing LNG, ENI Facilities, Ebocha, Obiafu/Obrikom gas plant, Nigeria, March 2006 - August 2006
- Keep the process parameters and the running of the plant within predetermined limits;
- Perform routine operations related to the process plant or section;
- Check normal working conditions of process equipment;
- Check proper conditions of circuit and equipment after maintenance.
7. «Engineering Methodical Centre», Senior Engineer, Almaty, Kazakhstan, August 2002-January 2003
- Gathering information from industrial entity;
- Analysing and compilation of Safety Declaration;
- Risk assessment.

- Kazakh National Technical University after K.Satpaev, Oil and Gas Institute, Almaty, Kazakhstan, speciality «Development and Exploitation of oil and gas field», Reservoir Engineer, 1997-2002
1.Bachelor degree in petroleum engineering;
2.Well graduated (GPA of 4.7 on 5.0 scale);
3.Degree research: “The water pattern flooding of horizon # XV on Uzen oilfield, Mangystau region”.

- Vessels operated under the pressure, KPO bv Training center, Aksai, Kazakhstan, December 2006
- Organization and performance of gas-hazardous works in the restricted space area, KPO bv Training center, Aksai, Kazakhstan, December 2006
- Permit to Work Course, KPO bv Training center, Aksai, Kazakhstan, December 2006
- Training for entry into Hydrogen Sulphide designated areas, KPO bv Training center, Aksai, Kazakhstan, December 2006
- AGIP KCO Special Project-1, Training Framework, 2003-2005
1. DCS system supervision;
2. Preparation of Process/Utility for Start-Up and Shut down;
3. Process/Utility Start-Up and Shut down Operations via DCS;
4. Process / Utility circuits and equipment preparation for maintenance;
5. Plant Performance Trends Monitoring;
6. HSE Procedures and policy;
7. Pump stations;
8. Equipment visual inspections;
9. Equipment testing and measuring;
10. Normal operating process parameters;
11. PFDs, P&IDs and single line diagrams;

- Raising the level of technical skills in «Russian-Canadian centre of oil and gas technology», program: «Oil production, transportation and oil treatment», Samara, Russian Federation, February 2002