Process Engineer with 7.5 Years Experience in Leading Oil Refinery of Pakistan

Seeking a position of Process Engineer in Process Engineering providing technical support to Operating units particularly the Oil and Gas / Petroleum Refinery using experience gained in Petroleum Refinery.

Process Engineer at Pak-Arab Refinery Ltd(PARCO). (Total6.5 Years)
As a Process Engineer in Technical Services department, providing technical support to following process units.
September 2001 ~ December 2005
Sulfur Recovery Unit (115M.Ton/day)
Amine Treating / Refinery Fuel Gas Treatment Unit
Sour Water Stripping Section (76M3/hr)
Kerosene Merox Unit (20,000BPSD)
LPG Merox Unit (4,500BPSD)
January 2006 ~ To date
Naphtha Hydrotreating Unit (2,5400 BPSD)
Platforming Process Unit (16350 BPSD)
CCR Process Unit (1000lb/hr)
1. Major activities includes
Preparing studies to develop test and implement changes in plant operations.
Organizing system performance monitoring to identify potential problems of major equipments especially compressors, turbines, pumps, exchangers, distillation column and absorption columns.
Issuing the monthly plant health reports. Involves close monitoring of test run and close collaboration with the operations department.
Prepare PFD's and P &ID's regarding any modification relevant to assigned process units.
Developed computer programs for process plants monitoring and yield prediction.
Plant modifications through Management of change (MOC)
Participate in TRC & HAZOP meeting on released issues of relevant process units
2. Technical Services
Providing technical services and assistance to other sections such as Instrumentation, maintenance, inspection and material as required.
Preparing technical specifications of operating chemicals and other materials and carrying out the technical evaluation of chemicals and catalyst bids.
Prepared / Preparing Standard Operating Procedures for implementation of Integrated Management System ((ISO-9001:2000, ISO-14001:2004 & OHSAS-18001:1999).
3. Catalyst Skimming, Passivation & Sulfiding
Carried out Passivation and Sulfiding of SCOT Reactor Catalyst (Co/Mo by criterion), at TGT-Section of Sulfur Recovery unit for catalyst skimming during TA-1 in 2002
Identified increasing pressure drop across NHT Reactor due to upstream catalyst dust carry over. Proposed to skim catalyst under nitrogen atmosphere, pressure drop across reactor decreased after re commissioning.
Conducted Catalyst Skimming and Sulfiding of NHT Reactor Catalyst (Co/Mo & Ni/Mo by UOP), at Naphtha Hydrotreating during current TA-2 in 2007 at PARCO.

1). MBA (by Common Wealth of Learning, Canada) Allama Iqbal Open University, Islamabad (2004-05)
Aggregated

1077/1000 72.0%
2). B.Sc. Chemical Engineering, Punjab University, Lahore (1996-2001)
Aggregated

3557/4800 74%
3). F.Sc. Air Base Inter College, Sargodha (1994-95)

817/1100 74%
4). Matric Govt. Central Model School, Sargodha. (1992-93)

709/850 83%