Electronics/Control Technician

Electronics/Control Technician- 1. Read schematic diagram especially during repair and assembly. 2. Troubleshoot and lays out electronics equipment. 3. Analyzed the I/O in the Oscilloscope 4. Make a graph of the I/O and analyzed its operation.

i. HSE/Safety Officer-Sungchang & Al-shaikh Cont. Co. Ltd
Project: Ibn Zahr PP-III Utilities and Offsite Project
Location: Jubail Industrial City, Kingdom of Saudi Arabia
Date: October 26, 2007 to Present
Duties and Responsibilities:
1. Safety inspection and audit
2. Supervise if SABIC standards were being followed
3. Conduct training and orientation to all workers
4. Check work permit and area must be inspected first
5. Team leader (Safety Concerned) in the site and to be assisted by the foreman, QC and Work Permit Receiver
6. Attend meeting together with other sub-contractor and main contractor
7. Checking the checklist of the crane and trailer
8. Investigate incident
9. Daily toolbox meeting
10. Conduct walk through in the worksite
11. Submit daily report to the manager regarding what happen to the site.
12. Checking Scaffolding and Inspect together with the HSE of the main contractor
13. Maintain housekeeping in all areas
ii. Safety Engineer- Voss and Veloso Development Corporation.
Project 2: Constructions of Manufacturing Plant and Offices. Three(3) storey building.
Location: Magay, Compostela, Cebu, Philippines
Date: December, 2005 to August 9, 2007
Project 1: Construction of 18 storey building.
Location: Cebu Business Park, Cebu City, Philippines
Date: June 21, 2003 to September, 2005
Duties and Responsibilities:
1. Supervise the Safety Officers
2. Monitor the workers if following the safety practices
3. Investigate incident
4. Conduct Tool Box meeting
5. Issue LOTO permits and insure all workers know when removing it.
6. Gives instruction and training for the personnel working on the area.
iii. Safety Officer-Mack Mayer Construction & Development Corporation
Project 2: Construction of 400 units 2 storey Town Homes [not able to complete-I resigned(no night shift)]
Location: Sacris, Maguikay, Mandaue City, Cebu, Philippines
Date: January, 2001 to January 12, 2001
Project 1: Construction of 7 Storey (Condo) Building
Location: Basak, Lapu-lapu City, Cebu, Philippines
Date: November 8, 1999 to December, 2000
Duties and Responsibilities:
1. Implement safety procedure.
2. Safety inspection and audit
3. Look for hazards and remove/replace/control if possible.
4. Orient all workers about safety procedure.
5. Inspect all workers for proper use of PPE.

i. Primary: Cogtong Elementary School
Cogtong, Candijay, Bohol
ii. Secondary: Bohol School of Fisheries
Cogtong, Candijay, Bohol
iii. Tertiary: University of San Carlos
BS in Electronics and Communications Engineering (BSECE)
Talamban, Cebu City

i. Safety Officer Training Course
1. Drilling Technology
2. Hydrogen Sulfide (H2S) and SCBA Instruction
3. Basic First Aid and CPR
4. Basic Offshore Safety or Basic Rig Pass Safety
5. Basic Construction Safety
Rodech Training Services Link International Inc.
ii. Programmable Logic Controller
Developing Mechatronics Software (Mechatronics Servicing NC III)
Technical Education and Skills Development Authority
iii. Desktop Publishing (Corel Draw and ADOBE Photoshop)
Department of Manpower Development and Placement
iv. Computer Technician (LICENSED)
Department of Manpower Development and Placement
v. AutoCAD
Department of Manpower Development and Placement
vi. Caregiver (INCOMPLETE)
MBL Development Training Center Corp.
vii. XPower Office Computer Training Course
Javasphere Computer Learning Center

PERSONAL INFORMATION:
Height: 175 cm
Weight: 176 lbs.
Sex: Male
Birth date: May 22, 1975
Civil Status: Married
Wife: Ophelia C. Ricamadas
Number of Children: 2
Languages Spoken: English, Tagalog and Cebuano
Passport Number: QQ0312365
Date of Issue: May 18, 2005
Date of Expiry: May 18, 2010
Place of Issue: Cebu City