QCInspector/QC engineer/welding Inspector

-arrange WQT -welding procedure specification and witness Procedure qualification test -witness ndt -review fabrication report -psychical project inspection -prepare test package for pipe hydrotest -prepare manufacture data record

* Kangean Energy Indonesia Ltd,
As Structural Inspector for fabrication Jacket and Deck for Kangean Energy Industry (KEI) – Gresik surabya - Indonesia.



* SAIPEM Asia

As QC Inspector for Pipe String and Spool for TTM/Trans Thailand Malaysia Pipeline Campaign Repair at Batam

* Saipem Indonesia

As welding inspector for welding Procedure Specification (PQR) BT6 10 -12 for pipe to bend tangguh Pipeline offshore and onshore Project.



* SAIPEM Indonesia

As welding inspector and structural Inspector for bottom and top side platform structure BP tangguh project. Project location at PT.Gunanusa Utama FABRICATOR– Cilegon.

Direct report to site QC Manager PT. Saipem Indonesia.

Description activity: Developed good works team between main contractor QC inspector and contractor QC inspector, welding supervisor, structural supervisor and foremen and attended for quality meeting and fabrication meeting. Monitor welding activities. Monitoring NDT for critical joints at platform structure and to monitor the joint repair and repair procedure as per specification. Make quality observation and reported daily to QC manager if any anomaly founded in fabrication activities.

Project: Fabrications two units jacket and platform, riser with cladding material and all pipes material for piping process is duplex material.


* PT. McDermott Indonesia Batam base
As QC welding inspector, direct reporting to chip QC welding inspector for coordination and quality daily progress report.



Description activity: To check type and dimension of material accordance to approval drawing. And monitoring welding activity (before welding, during and after welding).arrange NDT and control weld join repair (NDT).and also maintenance the relevant documents.

Project: WOOD SIDE PROJECT

ACADEMIC ATTAINMENT

* Engineering Degree (S1) from Institute Technology Medan
* civil Engineering
* GPA 2.84

PROFESSIONAL ATTAINMENTs

* CSWIP 3.1 Welding Inspector (attendance)


* CSWIP 3.0 visual Welding Inspector

CSWIP CERT No 24492

* Welding Inspector National Certification

Held by Indonesia Welding Society and Institute for Research and Development of Material and Product Industries - Bandung.

B4T certificate no: 0604.12-BTM.1221

IWS certificate no: 261.0604.WI.BTM

* Non Destructive Testing

Held NDE consultancy service sdn.bhd
LPT certificate no: 008/LPT/IV/IWS-NDE/2004

MPT certificate no: 007/MPT/IV/IWS-NDE/2004


* Safety leader training (12 Hours) Held by BP Berau Ltd

*Course12 hours for SANSS structure analyst. Cert no: 006/KS18/00.
* Auto Cad for 2D civil engineer

1. PT. Japan Gas Cooperation (JGC/NIKKI) - INDONESIA ( June 2011 to Present)
Assignment: QC/ Welding Inspector for Piping, Structure and Equipment.
Project: ASAHIMAS Expansion-V Chemical Plant Project at Cilegon - INDONESIA.
• Perform inspection and test activities as per approved inspection and ITP.
• Monitoring the vendor’s quality work to ensure that it's controlled in systematic manner to meet the project requirement.
• Review the inspection report, test report and MDR prepared by vendor.
• Issue warning letter/NCR to vendor when find any potential problem.
• Reporting occurrence of any NCR/Deviation from the specified requirements, detected during the routine/surveillance inspection visit to vendors work.
• Prepare regular inspection report to PQCM.
• Review and approved vendor fabrication document like QC execution procedure, WPS and PQR, Welder Quality Register and supervise welder performance, Fit/up and dimensional, NDT Report, PWHT and Painting.
• Issue inspection release certificate.