Electrical Engineer

To establish myself as the preferred Electrical Specialist in the field of Power industry and all other aspects of electrical industry.

1993- 1995
• Installation and commissioning of 230 kV HV Switchyard (Block A & B)
o Installations and commissioning of line disconnect switches.
o Installations and commissioning of HV Circuit Breakers
o Commissioning of Protective Relays (Breaker Failure Relays, Distance Relays, Busbars Differential Relays, Synchrocheck Relays, Line Differential Relays, Overcurrent Relays, Transformer Differential Relays)
o Commissioning of Event and Transient Recorder.
o Installations and commissioning of Batteries and Battery Chargers.
• Commissioning of 93.5 and 150 MVA Transformer
o Filling of Oil Transformer.
o Performed various tests: HV insulation resistance test, Winding resistance test, Turn Ratio Test, IPF test.
o Commissioning of built in type protection: (Bucholz Relay, Winding Temperature Indicators, Oil Temperature Indicator, Oil Level Indicator and Pressure Relief protection)


• Installation and Commissioning of 4.16 kV Switchgear
o Test of Vacuum Breaker, function and reliability.
o Commissioning and calibration of switchgear protection: (Differential Relay, Overcurrent Relay, Neutral Overcurrent)
• Commissioning of Gas and Steam Turbine Generator Protections and Main Transformer Protections
o For Generator Protection: Carry out Primary and Secondary protection test. (Generator Differential Protection, Reverse Power Relays, Loss of Excitation Relay, Overvoltage Relay, Negative Sequence Relay, Stator Ground Fault Relay, Rotor Earth Fault Relay, Overvoltage and Overcurrent Relay, Busbars Differential Relay, and Frequency Relay)
o For Main Transformer Protection: Carry out Secondary protection test. (Main Transformer Differential Relay, Transformer Overcurrent Relays and Neutral Overcurrent Relay)
o CT and PT Checking of integrity function: Polarity check and voltage ratio, insulation resistance test.
• Commissioning of Automatic and Manual Voltage Regulator for Generator.
• Commissioning of Motor Control Center including the calibration of Thermal Overload Protection of Motor starter.

1997
• Commissioned the 180 MW Mahanagdong Geothermal Power Plant in Leyte. All Protections from Generator, Main Transformers, MV Switchgears and LV switchgear.
• Re-commissioned and re-calibration of all protection relays of NESTLE Philippine Processing Plant in Cagayan de ORO city.

COLLEGE : Bataan National School of Arts and
Trades
LOCATION : Balanga City, Bataan
DATES ATTENDED : June 1980 - December 1981
COURSE TAKEN : Bachelors of Science in Industrial
Education (BSIEd)
MAJOR COURSE : Electrical Technology
___



Other Schools Attended
NAME OF SCHOOL : SRF APPRENTICE TRAINING INSTITUTE
LOCATIOIN : U. S. Naval Facility, Subic Bay
DATES ATTENDED : January 1982 - January 1986
TRADE TAKEN : ELECTRICIAN

NAME OF SCHOOL : NAVAL TRAINING SCHOOL COMMAND
LOCATION : Great Lakes, Illinois ( U.S.A. )
DATES ATTENDED : May 1987 - June 1987
COURSE TAKEN : Stromberg Carlson Automatic Telephone Maintenance

NAME OF SCHOOL : MULTI - AMP. INSTITUE
LOCATION : Dallas, Texas ( U.S.A. )
DATES ATTENDED : August 8, 1988 - August 19, 1988
COURSES TAKEN : Circuit Breaker Maintenance and Protective Devices Maintenance

Trainings and seminars

COURSE TAKEN : 145/242 kV SF6 AHMA & HKA Circuit Breaker
Maintenance
DATES ATTENDED : February 8 – 10, 2005
LOCATION : Mt. Pleasant, Pennsylvania, USA

COURSE TAKEN : Electrical Thermography Application
DATES ATTENDED : January 7, 2005
LOCATION : Makati City, Philippines

COURSE TAKEN : Root cause Failure Analysis
DATES ATTENDED : December 1 – 3, 2004

COURSE TAKEN : Internal IMS Audit
DATES ATTENDED : August 04 – 06, 2004

COURSE TAKEN : Maintenance Management System
DATES ATTENDED : May 27 – 29, 2003

COURSE TAKEN : Variable Speed Drive LCI, Operation and
Maintenance
DATES ATTENDED : September 16 - 18, 2002

COURSE TAKEN : Essential Communication Skills for Managers
DATES ATTENDED : May 06 – 07, 2002

Computer Technician
As a Computer Technician, I do the assembling of computer, installation of program software, troubleshooting and maintenance of computer. Check the proper function of each part such as main board and Processor, memory card, video card, power supply, LAN card, Modem (internal and external) Hard Disk Drive, Floppy Drive, Monitor and CD ROM including CD-RW & DVD RW and printer. I do the network arrangement and programming. This is to include the lay out of UTP cable, installation of network or HUB station and broadband network.
Telephone & Communication Technician
As a telecommunication technician, I do the maintenance of PABX, conduct and check the system through computer links and check the hardware of the system for wear. Lay out telephone extension cable and assigned extension numbers. Replace all defective hand set and coordinate with Telephone Company like PLDT and DIGITEL. Check and maintain trunk lines.
Knowledge in Refrigeration and Air Conditioning System
This is a part of my job task in the power plant. Installation of new ACU from .5 to 20 Hp. lay out pipe and tubing. Lay out cabling for controls. Install controls component and control wiring. Carry out commissioning up to operational function. Carry out maintenance of the system in monthly basis.
Plumbing Technician
Knowledge in audio / video system