Chemical Engineer

Participate in a technical position and be able to utilize my corrosion experiance

Chemical Engineer Kuwait
Job Responsibilities include but not limited to:-
1- Corrosion Chemical Treatment Field Services and Technical support engineer in association with Kurita Europe for industrial water treatment.
• Extensive theoretical and practical field knowledge of cooling water treatment in industrial facilities, including refineries and power plants. Implementation of chemical treatment programs for cooling water systems, including corrosion inhibitors, dispersants and oxidizing and non-oxidizing microbiological control agents. Diagnosed and prescribed corrective action for non-conforming systems. In addition to performing chemical analysis to identify protective water quality.
• Efficient theoretical and practical knowledge of the water and steam side operation of boilers of a variety of configurations, including fire-tube boilers and water tube boilers. Diagnosed and prescribed corrective action for non-conforming systems. In addition to using a variety of laboratory instrumentation to evaluate boiler water quality. Then implemented chemical treatments and counter measures for control of deposition and corrosion in the water and steam circuits.
• Design and evaluation of system losses / cycles of concentration for cooling towers.
• Root Cause Analysis
• Maintaining Key Performance Indicators (KPI’s) within contractual limits.
• Corrosion monitoring techniques.
• Contingency counter action plans – by both chemical adjustments and operational adjustments.
References
• KNPC - Mina Abdulla Refinery – High and Low pressure Boilers and Cooling Towers chemical water treatment Site Engineer.
• KNPC - Mina Ahmadi Refinery – Boilers chemical water treatment Site Engineer.
• KNPC - Mina Shuaiba Refinary – Project Manager of Cooling Towers chemical water treatment contract (May 2007 – May 2010).

2- Chemical Fuel Treatment Field Service Engineer in association with Petroferm Inc.
3- Research into new technologies and update on highest standards followed in the refining business with goal of introducing such into the local market.
4- Business Development.
5- Very familiar with Refinery units as its part of my job duties to identify potential solutions for existing corrosion problems.
6- Logistics coordination and budget management.

2003 Kuwait University - Faculty of Engineering Kuwait.
B.Sc. Chemical Engineering
Graduation Project
Design of an Ethanol production factory, Complete Hysis simulation, Cost and Economy Calculations, Overall site safety management.

• Cathodic Protection Tester. Cert No. 9908 - NACE Certified
• Design for Corrosion Control - NACE Certified
• Internal Corrosion for Pipelines - (Processing NACE Internal Corrosion Technologist Certification).
• Coating Inspector Program - CIP 1. Cert. No. 13781 - NACE Certified

Note: Have successfully completed NACE CP2 course in March 07 and NACE Basic Corrosion in August 07 with the intention of proceeding to be a certified Senior Corrosion Technologist and then a NACE certified Chemical Treatment Specialist followed by Corrosion Specialist.