Senior process engineer with Ten years work experience in oil and gas industries

working as senior process engineer / process engineer abroad to improve my work experience in large international company

August 2011-Now
SAZEH ENGINEERING & CONSTRUCTION CONSULTANT – Tehran, Iran – Senior Process Engineer (www.sazeh.com) (Large Size company)
Iran LNG Treating Units Project, Iran Liquefaction Company, Iran (EPC PROJECT)
The phase of this project is EPC and its capacity is one milion MMCFD. the place of project is in Tonbak at southwest of IRAN.

February 2006-August 2011
NAMVARAN CONSULTING ENGINEERING CO. (NCE) – Tehran, Iran - Process Engineer (www.namvaran.com) (Large Size company)

Abadan Oil Refinery Upgrading Project, NIOEC, Iran (BASIC DESIGN PROJECT)
The phase of this project was basic design. The capacity of this project was 210,000 BPSD of a mixed crude oil. the place of this project was in Abadan city in the southwest of IRAN. The main units in this project were as following:
CDU, VDU, LPG recovery, sour water stripping, Amine sweetening units, Isomerization, CCR, Naphtha hydrotreating, Kerosene Hydrotreating, Gasoil Hydrotreating, Hydrocracking, Hydrogen production, Tank farm, utilities and Flare system.

Gasoline Production Plant (GPP) Project, Esfahan Refinery, Iran (EPC PROJECT)
The phase of this project was extended of basic design and EPC project. The capacity of this project was 60000 BPSD of gasoline. The place of project was in Esfahan city in central of Iran. The main units in this project were as following:
Naphtha Hydrotreating, Isomerization, CCR, Flare, utilties.

Lavan Refinery Expansion Project, Lavan Oil Refining Co. Iran (BASIC & DETAILED DESIGN PROJECT)
This project is excuted in three phase: Prebasic, Basic, and EPC. the capacity of this projec was 50000 BPSD of crude oil. the place of this project was in Lavan Island in Persian Gulf. The main units of this project were as following:
CDU, VDU, Amine sweetening, sour water stripping, Light naphtha hydrotreating, heavy naphtha hydrotreating, Isomerization, CRU, kerosne Hydrotreating, gasoil hydrotreating, Utilities, flare and Tankfarm.

South Pars Gas Field (phase 14) Development Project, IPMI, Iran (FEED PROJECT)
The phase of this project was FEED. The capacity of this project was two millions MMCFD of reservoir fluid. The place of project was in Assaluyeh in south of Iran.

M.Sc. in Chemical Engineering (Major in Process design), Iran University Science and Technology (IUST) –
2001-Tehran-IRAN, Grade average: 17.5 from 20

B.Sc. in Chemical Engineering (Major in Process design of Petroleum Industries), Iran University Science and
Technology (IUST) – 1999-Tehran-IRAN, Grade average: 15.5 from 20

Training of PROII Software - Iran university science and technology- 20 hrs
Training of HEXTRAN Software- Iran university science and technology- 20 hrs
Training of Heat Exchanger design with ASPEN B-JAC Software- Novin Parsian company- 30 hrs
Training of process vessel sizing- Namvaran consulting engineering company- 4 hrs
Training of Depressuring Calculations- Namvaran consulting engineering company- 6 hrs
Training of steam trap application and selection- Namvaran consulting engineering company- 2 hrs
Training of Flare KO drum sizing- Namvaran consulting engineering company- 2 hrs
Training of ASPEN FLARENET software- Namvaran consulting engineering company- 2 hrs
Training in lubricant oil production plant- PARS oil refinery- 45 days
Training in herbicide production plant- ARAK petrochemical company- 45 days

•Proficient in using Process Simulators including PRO/II, HYSYS and PROMAX for Simulation of Complex Process units
•Thermal Design of Shell & Tube and Air-cooled Heat Exchangers by HTRI, Aspen b-jac and HEXTRAN
•Doing Process Calculations including but not limited to PSV Relief Load calculation, Flare system Calculation, Hydraulic calculation of Non-Pump and Pump circuits
•Extensive Process Design Experience, including but not limited to Preparation of PFD’s with Heat and Material Balance, Development of Process and Utility P&ID’s, Sizing of all major types of Process Equipments (Separator, Rotary equipment, Tower, Heat Exchanger, etc.), Equipment Datasheet Preparation, Preparing of Duty Specification, Process Description and Process Design Basis, Preparation of Equipment List, Utility Consumption List, Line List
•Process Team Leader in Basic Design Projects
•Process Engineer in Basic and Detailed Design Projects
•Experienced in Working with Engineering Standards e.g. API, TEMA, IPS
•Participation in HAZOP and SIL study Meetings
•Participation in PFD/P&ID Review and 3D model review meetings
•Knowledge of Crude Characterization
•Flare Network sizing with Aspen FLARENET