Resume Jan Dauwerse

Using my skills to do the commisioning of a new projec and start up. During this job, teach new operators and engeneers how to do their job. Do some calculations for a safe start up.

Process operator perfume industry, 1978 – 1979 with PFW, Amersfoort.
Process operator ethylene plant cold section in the field, 1979 – 1980 with DSM Geleen.
Process operator ethylene plant, in the field all sections and control room furnaces, (LHC2) 1980 – 1985 with DOW Terneuzen..
Building and start up Vinamul (emulsion plant) as shift supervisor / senior process technician, 1985 – 1987. Instruction plant was in Warrington, England.
Shift supervisor with Rockwool Lapinus, 1987 – 1988.
Shift supervisor DSM Stanyl pilot plant, building and start up Stanyl plant, 1988 – 1991.
Shift supervisor DSM logistics, 1991 – 1999.
Shift supervisor DSM / SABIC Etylene plant 4, 1999 – 2009. During stops, supervisor triptest team instumentation.
Commisioning, start up Olefins1 within Yansab (SABIC) as a consultant for engeneers, operation and shift supervisors, 2009 – 2010.
Process stop coordinator dedicated for the olefin plants in Geleen, 2011 – now.

Mavo 4, 1974, succesful.
MTS procestechniek, 1978, succesful.
Voorbereidend kandidaat technisch chemicus, 1983, succesful.
Second degree teacher mathematics, 75% completed. School was moved to Tilburg, so I could not follow any lessons.
Several practice training: mechanic tecnician, laboratory technician.

All the certificates to run a chemical plant, like safety guard, fire fighting, make permits and autorize,job safety analizes, root cause analizes, sampling oxigen, explosive and toxic.

As a shift supervisor I had the responsibility of a group of about 20 operators. Also the responsibility of the plant. I guarded the education of all the operators. How they perform in their function.
How to run a plant I have to know the rules of the government, environment and technical laws. I know all the steps of management of change. My experience of instrumentation helps me to solve problems with instumentation and know what precautions you have to take when you have to overide a switch. To guard the production, I use asset utilisation to find the gaps.
During my time in Yansab, I first work with the field operators and teached them how to check a new plant. How to read a P&ID, how to do a leak test, how to line up a part of the plant. Together with them, I checked the whole flare system. After that the gasoline hydrogenation unit and the cold storage. (liquid ethylene, propylene and raw C4) For this area I did the calculation how to chill down the lines and the storage tanks. The amount to send to the tanks with a chill down rate of 5 degrees a hour. I also had the lead of the first root cause analyses and learned the engeneers how to hold a RCA.
As a process stop coordinator I am resposible for the cold section of the olefin plants in Geleen. I also do small stops for the gasoline hydrogenation unit. My last small stop of this area tooks 10 hours less than estimated.