Assistant Driller

Six years of work experience as an Assistant driller on different types of rigs to drill oil and gas wells, during this period I gained a good experience in the drilling operations, mud fluids, cementing, fishing,bit mechanisms…etc.

Sino Tharwa Drilling Company(from July2006 up to date) that:-

>From July 2006 to May 2007 as a Roustabout in rig(ST #5)where it has 1500 HP drawwork,Varco TDS-11 top drive,10000ft drilling depths, using water basd mud as a drilling fluid, The rig is contracting with Ageeba Petroleum Company.

>From May 2007 to October 2008 as a Floor man in rig(ST#1) where it has 2000 HP drawwork, Varco TDS-11 top drive, 17000 ft drilling depths, , using oil basd mud as a drilling fluid, The rig is contracting with Petrobel Petroleum Company.
>From October 2008 to January 2010 as a Derrick man, in rig(ST #2)where it has 2000 HP drawwork,Varco TDS-11 top drive,12000ft drilling depths, using water basd mud as a drilling fluid, The rig is contracting with Khalda Petroleum Company.

>From January 2010 as an Assistant driller in rig (ST#2).

And I work as a Driller trainee from August 2012, in rig (S#T2).

Rig( ST#2) profile


Rig type: Diesel electrical driven with AC and 2000 HP draw work.

Rig nominal drilling capability with 5 inch OD drill pipes: 16,000 ft.

Liquid mud: 6 tanks, total capacity 2000 bbl.

Mast: 147 ft height ,gross nominal capacity 315 mton.

Top Drive: Varco, TDS 11-SA

Mud pumps: 2x F-1600, triplex, single acting, Max press. 5000 psi.

Solid control equipment: Mi Swaco.

Main Power: 3x CAT 35128B,1750HP.

Annular diverter: size 21.1/4 inch. w.p. 2,000 psi

Annular Preventer: size 13.5/8 inch. w.p. 5,000 psi

Double ram preventer : size 13.5/8 inch. w.p. 10,000 psi.

Single ram preventer: size 13.5/8 inch. w.p. 10,000 psi.

Choke & Kill manifold: size 4.1/16inch. w.p. 10,000 psi.

Accumulator Unit: Oil reservoir capacity 800 liters, Max. w. p. 3,000 psi.

Driller council: Touch screen, Joystick, high technology Capient.

B.sc of Petroleum and Mining engineering, Suez Canal university, July 2006.

1-IWCF Driller level – Randy Smith training center, certificate no.: (63774/EG424/3711)
2-Pumps mechanisms at petroleum Pipelines Company (3-31/7/2005).
3-Fire Fightening course.
4- Performing Authority.
5-H2S hazards.
6-Lifting operations.
7-Working at heights.
8-Environment protection.
9-Hand and power tools.
10- Stuck pipe course .
11-Basic and Advanced rig mathematics.
12-Job safety analysis(JSA).
13-Permit to work(PTW).
14-Gas testing & Confined spaces entry .
15- Basic first aid.