Senior instrumentation technician

I am looking for a new challenge within a leading organization in the advanced industrial sector that will allow me to evolve in my career.

-2005- 2014: CGG (Compagnie Generale de Geophysique): function: Senior instrumentation technician, Observer.
In charge of all electrical parts (low/middle/high voltage-UPS, lights), electronic parts (telemetry, power, parameters setting, GPS, sensors, acoustics, hydrophones), optical fiber, on board and at the sea, Data recording system in real time (Seal 408/428), 2D, 3D, 4D, Undershooting, Broadseis, Broadsourse, Multi Streamers (liquid/solid) deployment and recovery, maintenance, troubleshooting of equipments on-board and at the sea (by work boat operation).
Maintenance of Source: troubleshooting (rigid/soft arrays, G-Guns, Sleeve and Bolt).
In charge of automation systems, Siemens S7-400/300: PLC, DCS, HMI, WINCC-Supervision, streamer handling system, installation, programming, metrology (calibration), parameters setting, revamping of deck machinery (heavy rotating machinery: streamers winches, mag winches, mini winches handled by remote control or PVG).
HSE parts (WOI, JSA, TBM, permits to work).
Equipments: Rolls-Royce, Odim, Kungsberg deck machinery and hydraulic system (HPU).
Also in charge of deck operations, crane operations, inventories.


-2005: ARCELOR-MITTAL: Assistant project manager for Subcontractors department (project plan, production, QC), installation and programming of system of regulation oil tanker for lubrication for the line of production in metallurgy (2 tanks of 60 cubic meters each) by PLC Siemens S7-400 ( PT 100, level sensors, pressure sensors, emergency sensors under control by supervision);

-1999 - 2004: Ministry of Justice (Belgium), function: technician in logistics, statistics and maintenance of buildings (facilities);

-1999: G.M.S. (BELGIUM), function: Logistic technician;

-1998: USINOR-ARCELOR (FAFER):function: Production operator on CNC, technician;

-1998: MASSIVE (BELGIUM) function: warehouseman, technician and salesclerk;

-1997: Ministry of Finance: function: Accountant.

2001 - 2004:

Bachelor in Electromechanical,
Haute Ecole Roi Baudouin, Charleroi, BELGIUM
Training period at ARCELOR: electrical and automation department

1987 - 1994:

Secondary education
Certificate in accountancy and computer sciences
Institute saint Andre (BELGIUM)

Certification: FALCKNUTEC (ENGLAND) updated in 2014:

B.O.S.I.E.T. (OPITO approved);
Basic Safety & Emergency Preparedness (OLF approved) in accordance to Nogepa & UK Standards;
HUET.

Certification for Basic Rigging and Slinging Course: MSTS ASIA SDN BHD

Certification for crane operations G-20 by K.I.S. AS: Hydraulic fixed cranes, Basic Rigging and Slinging, Falls protection equipment according by the Norwegian standards.

Medical certification by C.M.E.T.E. (PARIS, FRANCE).

Vaccinations: typhoid, hepatitis, yellow fever, Japanese encephalitis, polio, tetanos.

Norwegian Medical Certification (July 2014) validated by SOS International.

Rolls-Royce: certification Deck Machinery: hydraulic, electronic maintenance (ODIM).

Underwater dives license PADI & CMAS & IFR.

Languages:

French: mother tongue
English: fluent
Dutch: basic knowledge
Thai: good command

Skills:

Electromechanical, automation, 2D, 3D, 4D, Undershooting, Broadseis, Broadsources,
multi streamers deployment and recovery, data recording system in real time, parameters setting, calibrations, QC, troubleshooting on board and at the sea (by WB operation Norpower 20 and 30 feet). maintenance of source (G-Gun, Sleeve and Bolt).

Softwares : SYNTRAK, SEAL (408/428), DIGICOURSE, DIGIFIN, SPECTRA, ARGUS, ORCA, GUNLINK (2000-4000), NAUTILUS, SSMS, TOPSHOOTER, PRISM, ESQCPRO, GEOVATION, SEAPRONAV, PRISM (WOI, JSA, TBM, PERMIT TO WORK), OTTIS, ODIM (streamers handling system), SIEMENS S7-300 & 400, WINCC, MICROSOFT OFFICE (Words, Excel, Access), Autocad, Linux.