| Reference | 3627/2010 |
| Date | 10/26/2010 |
| Location | Middle East |
| Scope | Supply of # 2 complete horizontal centrifugal pump w/ turbine and base plate Item: P 403 / P.F. 1 No. of stages: six Liquid handled: HC liquid (heavy naphtha) Specification: normal design Capacity in GPM @ P.T.: 166 179 Suc. Press. P.S.I.G: 0 33 Disch. Press. P.S.I.G: 850 850 Diff. Press. P.S.I: 850 817 Vapor Press @ P.T: NIL 15 Design Head (ft): 2700 2780 N.P.S.H. (avai.) (Ft): FLOODED N.P.S.H. (reqd.) (Ft): 8 Pumping Temp. (°F): 100 217 Specific Gravity @ P.T.: 0.728 0.679 Viscosity @P.T. (SSU) CPS: 0.57 0.30 Nozzles / Suction: 4" 600 # ASA R.F. (Top) / Discharge: 2" 600 # ASA R.F. (Top) Thrust Bearing: Kingsbury Radial Bearing: sleeve Bearing Lubrication: Forced FEED Pump should be according to API 610 Last Edition, between bearing mounted (API BB5) Pump should be equipped with: Mechanical seal exclusively from (John Crane or Burgmann) Flexible coupling, with spacer. Non-sparking coupling guard. Turbine specifications: Inlet Steam Temp. °F: 480 Inlet Steam Press. PSIG: 210 Inlet Steam Press. (Max) PSIG: 250 Exhaust Steam Press. PSIG: 40 Rated Power HP: 140 Speed RPM: 4000 Turbine shall be: Manufactured According To API (611), Last edition. In-between bearing design, horizontally split casing with centerline support (upper half can be removed without disconnecting inlet & exhaust piping). Back pressure design. Equipped with sleeve type radial bearing, ring lubricated, water cooled with water specification (3.5 bar 32 °c) and antifriction thrust ball bearing. Equipped with floating carbon seal rings on both sides. Turbine shall be furnished with: TG 13 Governor. Mechanical tachometer. Thermometer for both bearing housings. Strainer at turbine inlet. Adequate cooler, if necessary. - Pumps are accepted, exclusively, from the following origins: (USA West European Japan). - Turbine manufacturer should be one of the following: (Elliott / Peter-Brotherhood). |
| Bid Bond | 1% of submitted prices |
| Documents Price | ID 150,000 |
