| Reference | 58.11.4102 |
| Date | 6/10/2011 |
| Location | Middle East |
| Scope | 1- Supply of #20 bottom hole flow through oil sampler with specification as follows: - Capacity 600cc - Maximum Temperature150 °C - Maximum Pressure 10,000 psi - Diameter 1.5” - Seal Material Viton - Material 17-4 PH/SS Monel , H2S and CO2 service - PH (2, 10) - Salinity 300,000 ppm - Transfer Method - Mercury Equilibrium - Clocks Programmable For 1, 2,2.5,3,3.5 - and 6 hours - Supply of #10 kit recommended two years spare part for flow through sampler. 2- supply of #10 wellhead digital memory pressure gauge with specifications as follows: Sensor Type Silicon-Sapphire Pressure Ranges Up to 10,000 PSI Pressure Accuracy 0.03% (FS) Pressure Resolution 0.0003% Pressure Drift <3 PSI / year Temperature Rating -4°C to 65 °C Temperature Accuracy 0.5 °C Temperature Resolution 0.01 °C Power Source Two single D lithium pack, up to one-year usage Communications USB, RS232 Data Set time/pressure/temperature Memory Capacity 1,000,000 data sets Display Mode liquid crystal Outside Diameter 4.625" (117.5 mm) (indicator dial) Overall Length 10" (254 mm) Service H2S, CO2 Sample Rate 1 second to 18 hours Connection 1/2" NPT/Autoclave Suitable carry case - Supply of #5 kit Recommended spare part for two years. 3- Supply of #10 Digital Hydrometer type SBS with specification as follows: - Measures specific gravity and temperature - Specific Gravity testing Range: 0.0 to 2.0 - Indicator: High resolution dot matrix display; - Measuring time: within 3 Seconds - Power Supply: (2) AAA batteries – approx. 90 hours battery life - Accuracy: +/- 0.001 - Suction nozzle: 12" - Stores 1,100 results internally - LED display - Software package for downloading - Ambiance temperature (-5°C to70 °C) - H2S and CO2 service - Suitable carry case 4- Supply of #10 digital thermometer with specifications as follows: - Rang (-5°C to 100°C) - H2S and CO2 service - LED display - Accuracy: +/- 0.001 - Suitable carry case 5- Supply of #3 laboratory Table Top oil test centrifuge Bright LCD display - Capacity 5 × 2.5-5ml -Top speed 10000 rpm, Minimum speed 500 rpm - -Short acceleration and deceleration -Low temperature increase during run -Easy handling, big buttons -Short- and continuous run, 99-minute timer -Two acceleration and deceleration curves - Motorized lid lock - Power supply 220-240V, 50/60 Hz - Noise Level at Maximum Speed <60dB -Supply of #100 Suitable glass centrifuge tube 6- supply of #5 complete gas sampling system with fluid sentinel with specification as follows: - Skid mounted portable type - Working pressure 2000 psi - H2S and CO2 service. - Ambient temperature (-5°C to 70°C) 6.1 supply of #20 gas sample cylinder with specifications as follows: - 1000 CC volume - Standard with 5 Year No Leak Warranty - Burst Disc Holder and 2,000-PSI Pressure Gauges - Seamless 316 Stainless Steel Construction H2S and CO2 service -Suitable carry case 6.2 supply of #10 capillary tube connection (5 m) compatible with gas sample System and compatible with 1/2" NPT/autoclave 6.3 supply of #5 kit recommended spare part for two years |
| Bid Bond | 1% of the bid price |
| Bond Validity | 120 days |
