| Reference | BID97101030 |
| Date | 3/15/2011 |
| Location | Middle East |
| Scope | 1. Total organic carbon analyzer: # 1 TOC-VCSH total organic carbon analyzer. High-sensitivity modelCombustion catalytic oxidation/NDIR method, Standalone, Basic unit with Built-in operation keys, LCD display & printer .With auto sampler & all Accessories, with all reagents & spare part for two years Specification: - Measurement method: 680 degC combustion catalytic oxidation/NDIR method - Operation method: standalone - Measured items: (TC, IC, TOC, NPOC, POC, TN) - Applicable samples: aqueous sample, solid, gas) - Measurement range (mg/L): TC: 0 to 25000, IC: 0 to 30000 - Detection limit: 4??g/L - Measuring time: TC: aprox. 3 mins IC: aprox. 3 mins - Sample injection: automatic injection - Sample injection volume: 10 to 2000µL variable - IC pre-treatment: Automatic internal acidification and sparging - Automatic dilution: dilution factor 2 to 50 - Carrier gas: High purity air - Gas pressure: 300kPa - Operating keys: built-in - Display: built-in LCD - Printer: built-in - Power supply: AC220~240V # 1 Auto sampler ASI-V Specification: - Vial types: 40 ml - Number of vials: 68 - Vial septum: with dedicated septum - Sample sparging: OK (if the external sparging kit is used) # 1 TN (total nitrogen) unit TNM-1 Specification: - Measurement method: Chemiluminescence - Measured items: TN (Total Nitrogen) - Measurement range: 0 to 4000mg/L - Detection limit: 5µg/L - Ozone source gas: Air (compressor air, or housing air) 500mL/min - Measuring time: approx. 4 mins. - Supplied gas: Air, pressure; 300kPa. - Nitrogen carrier gas kit - Sample adjustment tank - Power requirement: 220 ~240V # 1 Solid sample combustion unit SSM-5000A Specification: - Method: TC:catalytically aided combustion oxidation at 900°C. IC:Pre-acidification, oven temperature: 200°C. - Measured item: TC, IC, TOC - Measuring range: TC: 0.1 to 30mg carbon (1~20??g carbon in high sensitivity measurement) IC: 0.1 to 20mg carbon - Sample amount: 1gram-aqueous content < 0.5g - Analysis time: 5 to 6 minutes at a gas rate - Carrier gas: 99.9% O2 at the 500mL/min. High-purity O2 Gas is required for high sensitivity measurement - Power requirement: 220~240V 50/60Hz Special accessories / one from each accessories Specification: - Carrier gas purification Kit - Nitrogen carrier gas kit - Gas Purifier, adsorption type - Gas sample injection kit - POC kit - ASI-V magnetic stirrer & ASI-V stir bars 40 mL vials - Suspended sample kit - External sparge kit - Air supply pipe set - Small vial rack set for ASI-V Requirements Specification: - CERAMIC FIBERx1 - Chart paper for TOC-VE (10pkt) - O-ring,4D P20 ...5/PKTx1 - CO2 absorber,x2 - CO2 absorber,x2 - quartzwool,1GRx1 - Catalyst,st typex3 - TOC standard solution 10 L # 1 Personal computer Specification: According to system requirements 2 - Chemical oxygen demand: ?# 1 spectrophotometer Specification: COD (chemical oxygen demand ) Photo meter lab 230 v AC euro and 240 V AC Including English manual Guaranty for defects on quality 1 year # 1 Thermo reactor for (COD) Specification: Thermo reactor for (COD) and thermal digestion for up to 12 reaction cuvettes, with 3 reactors Temperature 5 programs, 220 -240 V AC - 1x 12 sample (average 16 mm) - Control accuracy: +/- 1Cº, +/- 1 digit - 5 store programs - Integrated safety hood - Safety class 1 meeting DIN VDE 0700 teil1/11.90 - Timer function - Displays when reaction temperature is reached Guaranty for defects on quality 1 year COD cuvette test / 250 x 28 pk Specification: COD cuvette test Measurement range 0.0- 150 mg/L and high range 25 determination +3 bonus cuvette Cuvette round Used with photo lab s6/ 12 spectral or HACH Dr 2500 spectrophotometer # 1 Blender Specification: Blender. 2-speed, 220 -240 V AC # 1 COD Digestion Reagent vials. Specification: COD Digestion Reagent vials. # 1 Magnetic stirrer and stir bar. Specification: Magnetic stirrer and stir bar. 220 -240 V Reagents 10x200 ml Pk Specification: - COD Standard Solution low range - Potassium Acid Phthalate, ACS 1000 g - Mercuric Sulfate, 100 g Accessories for 1000 test Specification: - With all suitable reagents for two years - All Accessories suitable for test 3- Biological oxygen demand: # 2 BOD IS 12 Measurement using OXI TOP is based on pressure measurement in a close system Specification: BOD 5 measuring for self ? checks with 12 measuring Units universal power supply 220 V AC 50HZ, and accessories Specification: Measuring of: BOD n Pressure range: 500 -1350 hpa Accuracy +/- 1% of value +/- hpa Resolution: 1 hpa (corresponds to 0.7 % of BOD n measuring range) Power supply: lithium batteries (280 MAH), 2XCR 2430 Ambient temperature: storage (25 -65 c) # 1 Thermostat cabinets Specification: Thermostat cabinets: incubator cabinets for 2 BOD Oxitop system (12 standard bottle each) 230AC 50HZ # 2 Magnetic stirrers Specification: Magnetic stirrer and it bar according to system requirement Reagents For 1000 test Specification: All suitable reagents and agar |
