| Reference | 3566/2011 |
| Date | 7/24/2011 |
| Location | Middle East |
| Scope | Item 1 Set of complete horizontal centrifugal pump with electric motor and base plate. Pump item: o1 – p8 a/b qty: 2 nos Scope of supply for each unit 1- Pump shall be manufactured according to (api 610). 2- Ring oil lubricated antifriction bearing. 3- Flange pump drains. 4- Flexible spacer coupling between pump and motor dynamically balanced. 5- Non –sparking coupling guard. 6- Single mechanical seal accordding to (api 682). 7- Fabricated steel base plate. 8- Centerline case –mounting. 9- Standerd documentation including operation and maintenance manuals in english. 10- The pump should be from one of the following manufacturers union, Goulds,ksb,ruhr pumpen , sulzer , cerpelli and weir 11- Pumps manufacturer should be of (u.s.a,west european,), the pump should be from mother company. Operation conditions: Liquid hydrocarbons: sae 30 distillate Disch. Press. Psia: 118, 6 Igpm at pumping temperature: normal 32 - design 65 Pumping temperature o f: 587 normal Suction press. Psia: normal 4. 6---- Max. 40 Sp.gr. At pumping temperature: 0.74 Diff. Press psi: 114 Vap. Press. At pumping temperature psia: 1.5 Diff. Head ft: 355 Vis at pumping temperature ssu: 32 Npsh avail. Ft: 9.8 Nozzles: Suction / size: 2" / asa rating: 300 / facing: rf / position: top Nozzles: Discharge / size: 1 1/2" / asa rating: 300 / facing: rf / position: top Impeller type: closed Cooling water for bearing housing Mechanical seal mfr: john crane or eagle burgmann Lubrication type: oil ring Material code Material of pump shall be manufactured according to api 610 Casing: 5% cr.1/2% mo. Steel Impeller: 11-13% chrome steel Shaft: sae 4140 Coupling Meta stream tsk with spacer coupling guard no sparking Motor driver Item no. : O1mp8 a/b Rpm: 2920 Volte /phase/cycles: 380/3/50 Explosion proof: eexd ii ct4 Motor manufacturer: west Europe, usa Item 2 Set of complete horizontal centrifugal pump with electric motor and base plate. Qty: 2 nos Item pump: 01 – p9 a / b Scope of supply for each unit 1- Pump shall be manufactured according to (api 610). 2- Ring oil lubricated antifriction bearing. 3- Flange pump drains. 4- Flexible spacer coupling between pump and motor dynamically balanced. 5- Non –sparking coupling guard. 6- Single mechanical seal accordding to (api 682). 7- Fabricated steel base plate. 8- Centerline case –mounting. 9- Standerd documentation including operation and maintenance manuals in english. 10- The pump should be from one of the following manufacturers union, Goulds,ksb,ruhr pumpen , sulzer , cerpelli , weir 11- Pumps manufacturer should be of (u.s.a,west european), the pump should be of Mother company. Operating conditions: Liquid hydrocarbons: intermediat distillate Igpm at pumping temperature: normal 20—desgn 41 Disch. Press. Psia : 110 Pumping temperature o f: 505 Suction press. Psia : nor. 10 - Max 45 Sp. Gr.at pumping temperature: 0.744 Diff. Press. Psi: 100 Vap. Press. At pumping temperature psia: 1.2 Diff. Head at pumping temperature ft: 310 Vis at pumping temperature ssu: 32 Npsh avail ft: 25 min Nozzles: Suction / size: 2" / asa rating: 150 / facing: rf / position: top Nozzles: Discharge / size: 1 1/2" / asa rating: 150 / facing: rf / position: top Impeller type: closed Mechanical seal: john crane or eagle burgmann Cooling water bearing housing Coupling Meta stream tsk with spacer coupling guard no sparking Material code Material of pump shall be manufactured according to api 610 Casing: steel Impeller: steel Inner case parts: 11-13% chrome Sleeve for mechanical seal: aisi 316 Wear ring: 11-13% chrome Shaft s.steel: sae 4140 The pump shall be mechanical seal Motor driver Item: 01mp9 a/b Rpm: 2900 Volts /phase /cycles: 380/3/50 Item 3 Pump no.: P426 qty: one Scope of supply for each unit 1- Pump shall be manufactured according to (api 610). 2- Ring oil lubricated antifriction bearing. 3- Flange pump drains. 4- Flexible spacer coupling between pump and motor dynamically balanced 5- Non –sparking coupling guard. 6- Single mechanical seal accordding to (api 682). 7- Fabricated steel base plate. 8- Centerline case –mounting. 9- Standerd documentation including operation and maintenance manuals in english. 10- The pump should be from one of the following manufacturers union, Goulds,ksb,ruhr pumpen , sulzer , cerpelli , weir 11- Pumps manufacturer should be of (u.s.a,west european) ,the pump should be of Mother company. Operating conditions: Service: propane transfer pump Pumping temp co: 37.8co Sp.gr. At pumping temperature: 0.6 Vap.press. At pumping temperature kg /cm2 a : 12.8 Vis at pumping temperature c.s: 0.1 Capacity rated m3 /min: 0.15 Speed rpm: 2960 Max .head rated imp. M: 103 Min. Continuous flow m3 /min: 0.13 Stage no. : One Lubr. Oil ring Discharge press. Kg/cm2 g: 19.0 Suction press rated kg/cm2 g: 13.0 Diff. Press kg/cm2: 6.0 Diff.head m: 100 N.p.s h avail. M: 1.8 Nozzles size asa rating facing position Suction 3” ansi 300# rf end Discharge 1 ½” ansi 300# rf top Materials (astm) Impeller: a351 cf8 Casing: a351 cf8 Shaft: a322 4140 Shaft sleeve: a276 304 Casing ring: b584 ia Impeller ring: a276 420 Gasket: piillar 2100 Driver motor Speed rpm: 3000 Type of protection: eexd ii ct4 Insulation class: f Volts/ phase /cycles: v 380, 3phase, 50 Hz Manufacturer: west europe Ip: 55 |
| Bid Bond | 1% from Submitted Prices |
| Documents Price | ID 50 000 |
