| Reference | 3614/2011 |
| Date | 7/24/2011 |
| Location | Middle East |
| Scope | ITEM 1:- Complete horizontal screw pump and base plate according to api 676 Qty.: (2) electric motor driven pumps Operating conditions for pumps: Service: fuel oil Pump type: screw (three spindle) Capacity: 140 gpm Differential pressure: 35 bar Temperature: 150ºf Npsh av 30 ft Specific gravity: 0.97 at 60ºf Viscosity: 450 cst at 130ºf R.P.M 1000 - Single mechanical seal from eagle burgmann or john crane according to api 682 should be fitted - Pump should be equipped with safety valve, fitted on the pump - Flexible spacer coupling between pump and electric motor dynamically balanced - Non – sparking coupling guard - Fabricated steel base plate - Standard documents including operation and maintenance manuals in english - Pumps origin should be from (USA, West Europe, or Japan) and from one of the following manufacturers (plenty, allweiler, bornemann, leistritz) Electric motors: Electric motors should be explosion proof induction type as following specifications: - Volts, phase, cycle: 380/3/50 - Eexd iic t 4 - Insulation class: f - Ip 55 - Bearing should be antifriction type with grease lubrication - Encl: tefc - Ambient temp: 55 co (max) - Manufacturer (usa or west europe) and from abb, siemens , nancy , schorch , ansaldo - Speed 1000 rpm Item 2:- Complete horizontal screw pump and base plate according to api 676 Qty: (1) steam turbine driven pump Operating conditions for pumps: Service: fuel oil Pump type: screw (three spindle) Capacity: 140 gpm Differential pressure: 35 bar Temperature: 150ºf NPSH av 30 ft Specific gravity: 0.97 at 60ºf Viscosity: 450 cst at 130ºf R.P.M 1500 - Single mechanical seal from eagle burgmann or john crane according to api 682 should be fitted - Pump should be equipped with safety valve, fitted on the pump - Flexible spacer coupling between pump and electric motor dynamically balanced - Non – sparking coupling guard - Fabricated steel base plate - Standard documents including operation and maintenance manuals in english - Pumps origin should be from (usa, west europe, or japan) and from one of the following manufacturers (plenty, allweiler, bornemann, leistritz ) # Turbine drive - Steam turbine shall be due to api standard 611 - Steam pressure: 240 psig - Temperature: 480 ºf - Exhaust steam pressure: 10 psig - Turbine speed: 1500 rpm - Turbine rotation: cw viewed from governor end. # Turbine should be furnished with: 1- Tachometer 2- Thermometer for bearing 3- Ring oil lubricated. 4- Water cooling jacket and water cooling piping 5- Governor Wood wards tg13, the ordinary type (not oil pump type or any other different type) 6- Casing relife valve. 7- Carbon sealing ring. 8- Casing with insulation. # Turbine should be form one of the following manufactures: - (dresser – rand, elliott) |
| Bid Bond | 1% from Submitted Prices |
| Offer Validity | 120 days |
| Documents Price | ID 150 000 |
