| Reference | 3629/2011 |
| Date | 7/24/2011 |
| Location | Middle East |
| Scope | ITEM- 1 - Complete horizontal centrifugal pump with motor and base plate according to API 610 last addition. QTY: - 4 NOS Operation condition of pump Liquid Gasoline Flow 25 m3/hr Pumping temperature 60 co Sp.Gr @ p. T 0.7 Disch. Press 4 kg / cm2 Suct. Press Atmosphere NPSH available 2 m VAP Press 0.8 Nozzle: Suction / Size: 3 " / Postion: End Nozzle: Discharge / Size: 1.1/2 " / Postion: Top Material Cod Material of pump shall be manufactured according to API 610 table H1 Material class C6. Motor Driver R.P.M: 2950 Volt / Phase / cycles: 380 / 3 / 50 Explosion proof: EEXD 11 CT4 IP: 55 Motor manufacturer: should be from one of the following:- (Siemens, Schorch, ABB, Brook) and from origin (West European – USA) Scope of Supply for Each Unit 1. Pump shall be manufactured according (API610). 2. Bearing should be antifriction ball bearing ring lubricated type. 3. Flange pump drains. 4. Flexible metastream coupling dynamically balanced between pump and motor. 5. Non-sparking coupling guard. 6. Single mechanical seal according to (API 682). 7. Mechanical seal manufacturer: John crane or Eagle Burgmann. 8. Fabricated steel base plate. 9. Centerline case-mounting. 10. Standard documentation including operation and maintenance manuals in English. 11. The pump manufacturer should be from one of the following:- (Union, Goulds, KSB, RUHR Pumpen, Sulzer, Flowsserve and Weir). 12. Pump manufacturer should be (USA, West European) ITEM- 2- Complete horizontal centrifugal pump with motor and base plate according to API 610 last addition. QTY: - 4 NOS Operation condition of pump Liquid Kerosen Flow 25 m3/hr Pumping temperature 60 co Sp.Gr @ p. T 0.75 Disch. Press 4 kg / cm2 Suct. Press Atmosphere NPSH available 2 m Nozzle: suction / Size: 3 " / Postion: end Nozzle: Discharge / Size: 1.1/2 " / Postion: Top Material cod Material of pump shall be manufactured according to API 610 table H1 material class C6. Motor Driver R.P.M: 2950 Volt / Phase / cycles: 380 / 3 / 50 Explosion proof: EEXD 11 CT4 IP: 55 Motor manufacturer: should be from one of the following:- (Siemens, Schorch, ABB, Brook) and from origin (West European – USA) Scope of Supply for Each Unit 1. Pump shall be manufactured according (API610) . 2. Bearing should be antifriction ball bearing ring lubricated type. 3. Flange pump drains. 4. Flexible metastream coupling dynamically balanced between pump and motor. 5. Non-sparking coupling guard. 6. Single mechanical seal according to (API 682). 7. Mechanical seal manufacturer: John crane or Eagle Burgmann. 8. Fabricated steel base plate. 9. Centerline case-mounting. 10. Standard documentation including operation and maintenance manuals in English. 11. The pump manufacturer should be from one of the Following :- (union, Goulds, KSB, RUHR Pumpen, Sulzer, Flowsserve and Weir). 12. Pump manufacturer should be (USA, West European) ITEM- 3- Complete horizontal centrifugal pump with motor and base plate according to API 610 last addition. QTY: - 2 NOS Operation condition of pump Liquid Diesel oil Flow 25 m3/hr Pumping temperature 60 co Sp.Gr @ p. T 0.81 Disch. Press 4 kg / cm2 Suct. Press Atmosphere NPSH available 2 m Nozzle: Suction / Size: 3 " / Postion: End Nozzle: Discharge / Size: 1.1/2 " / Postion: Top Material Cod Material of pump shall be manufactured according to API 610 table H1 material class C6. Motor Driver R.P.M: 2950 Volt / Phase / cycles: 380 / 3 / 50 Explosion proof: EEXD 11 CT4 IP: 55 Motor manufacturer: should be from one of the Following :- (Siemens, Schorch, ABB, Brook) and from origin (West European – USA) Scope of Supply for Each Unit 1. Pump shall be manufactured according (API610). 2. Bearing should be antifriction ball bearing ring lubricated type. 3. Flange pump drains. 4. Flexible metastream coupling dynamically balanced between pump and motor. 5. Non-sparking coupling guard. 6. Single mechanical seal according to (API 682). 7. Mechanical seal manufacturer: John crane or Eagle Burgmann. 8. Fabricated steel base plate. 9. Centerline case-mounting. 10. Standard documentation including operation and maintenance manuals in English. 11. The pump manufacturer should be from one of the following: - (union, Goulds, KSB, RUHR Pumpen, Sulzer, Flowsserve and Weir). 12. Pump manufacturer should be (USA, West European) |
| Bid Bond | 1% from Submitted Prices |
| Offer Validity | 120 days |
| Documents Price | ID 150 000 |
