| Reference | BID900819 |
| Date | 7/25/2011 |
| Location | Africa |
| Scope | Provision of surface testing equipment and services in OML126/137. The contracts are proposed to commence in Q1, 2012 and continue for duration of two (2) years. As a minimum requirement, the selected Contractor shall have the necessary experience, capability and shall be fully responsible for the provision of Surface Testing Equipment and Services suitable for use in water depths up to 1,500 feet with requirement for both 10,000psi and 15,000 psi rated H2S environment. ETB-0488 Surface Testing Services: Contractor must be able to provide Surface Testing Equipment and Services to fulfill the following requirements: -Surface testing equipment and personnel required to handle flowback of well effluent during Well Testing and clean up operations on offshore floating drilling facilities. The SOW covers the equipment needed from the rotary table through to the burner booms. The equipment proposal must be able to fulfill the following requirements. -Safe flow, containment and control of well effluent during all phases of the operation. -Safe disposal of well effluent according to regulatory environmental requirements. -Measurement and sampling of well effluent during flow-back operations. -Measurement and recording of all flow parameters. -All other related equipment, tools and experienced personnel necessary to satisfactorily perform the above services. |
