| Reference | 3652/2011 |
| Date | 9/29/2011 |
| Location | Middle East |
| Scope | Complete horizontal centrifugal pump with electric motor and base plate Qty :2 NOS. 1- Pump shall be manufactured according to API 610 2- Bearing should be antifriction bearing, ring lubricated type, water cooled with water specification (2-3) bar 35 C°if it is required 3- Flange pump drains. 4- Flexible coupling dynamically balanced between pump and motor 5- Mechanical seal Mfr: John crane, Burgmann 6- Non sparking coupling guard 7- Mechanical seal according to API 682. 8- Fabricated steel base plate. 9- Centerline case – mounting type OH2 10- Standard documentation including operation and maintenance manuals in English 11. The pump venders should be one of the following: Union, Goulds, KSB, RUHR pumpen, Sulzer, flowserve, and weir 12. Pump manufacture should be USA or WEST EUROPEN Operation pump condition Liquid: hydrocarbon Capacity: 90 G.P.M. Head: 391.5 ft. Pumping temperature : (40–50)C° Sp .Gr. @P.T: 0.583 Vapor pressure @ P.T: 13.25 psig. Discharge pressure: (70 -80) psig . Suction pressure: (30 -40) psig . Differential pressure: 40 psig . Total sulfur: (400 -500) PPM Material code: C6 Appendix H1 according to API 610 Motor Rpm 2950 Motor power should be at 20% more than rated power of the pump Motor type EexdllCT4, IP 55, class F insolate ion 3ph/380volt/50Hz |
| Bid Bond | 1% from Submitted Prices |
| Documents Price | ID 100 000 |
