| Reference | 3554/2013 |
| Date | 11/18/2013 |
| Location | Middle East |
| Scope | Supply of complete horizontal screw pump with turbine and base plate Item 001 QTY=1, Pump with operating conditions for pumps: Service: blend asphalt -heavy slop Pump type: screw Capacity: 50 igpm - 13.5 m3/hr Differential pressure: 200 psig Suction pressure: opsig Discharge pressure 200 psig Temperature: 120- 150c° Npsh av l0ft Specific gravity: 1.02-1.04 at pt Viscosity: 200-1500mm2/s R.P.M 1000 I-pump manufacture according to API 676 latest editions. 2- single mechanical seal shall be according to API 682 and from the following (John crane or eagle Bourgmann, Flow Serve) 3- pump should be equipped with safety valve, fitted on the pump 4- flexible spacer coupling between pump and turbine dynamically balanced 5- non - sparking coupling guard material 6- fabricated steel base plate 7- standard documents including installation, operation and maintenance manuals in English ( three hard copy and one CD format the documents shall be original ). 8- pumps origin shall be from (USA, West Europe, Japan, Canada, Australia, India, South Korea) 9-pump shall be manufacture with replaceable internal liner 10-pump shall provide with steam jacket. Item 002 Steam turbine 1. Turbine shall be in between bearing design 2. Turbine should be back pressure design 3. Turbine radial bearing shall be sleeve type with antifriction ball bearing for thrust 4. Bearing should be ring lubricated type water cooled with water specification 3 bar 35 C° 5. Governor shall be WoodWard TG- type 6. Turbine shall be manufacture completely according to API 611 last addition 7. Carbon ring floating sealing ring for both side 8. Turbine shall be furnished with tachometer mechanical + electrical 9. Adequate cooler 10.Turbine power shall be 20% more than pump rated power I1.Turbine casing shall be of material code steel with sentinel valve warning 12.Testing and balancing should be according to API 13.Noise level shall be less than 85 dB at 1 meter from the turbine 14.Turbine shall be horizontal split design 15.Turbine inlet should be furnished with strainer 16.Turbine shall be furnished with mechanical over speed trip 17.Turbine shall be manufactured byone of the venders (Dresser-Rand, Elliott ) 18.Steam condition: Pressure max. 18 Kg/cm2 Normal 16 Kg/cm2 Min. 14 Kg/cm2 Temp. max. 260°C Temp. min. 240°C Exhaust max. 3Kg/cm Exhaust max. 2.8Kglcm 19.Third party inspection by BUREAU VERITAS (BV) of France 20.Certificate of origin legalized by Iraqi embassy from country of origin mill certificate |
| Bid Bond | 1% from Submitted Prices |
| Offer Validity | 120 days |
| Documents Price | ID 250,000.00 |
