| Reference | BID902978 |
| Date | 9/1/2014 |
| Location | Africa |
| Scope | TEPNG operator of the NNPC/TOTAL Joint venture invites interested reputable and pre-qualified contractors with relevant experience for this tender opportunity for Onshore Drilling and Completions Support Services for OML58 Drilling Campaign for 2015-2018. The expected duration of the contracts are two (2) years plus one (1) year optional duration extension. A. Casing/Tubing Running Services Contractors shall provide experienced personnel, equipment and services to handle, clean, drift and perform controlled make up of casing and tubing connections for tubing and casing pipes ODs ranging from 2" to 30". Special tubing like Chrome Tubing will be involved. B. Cementing and Pumping Services Contractor shall provide pumping facilities to perform cement jobs (casing, squeeze, acidification, safety...) and also the relevant equipment (mixing, bulking, casing accessories...), additives and cement needed. Engineering shall be in accordance with modern handling of such systems and with laboratory expertise of cement slurries or other fluids. Contractor shall participate in the presentation of cement programmes and suggest improvement. Contractor shall provide experienced personnel. C. Coiltubing and Nitrogen Services Contractor shall provide experienced personnel, equipment, personnel and services to perform Coil Tubing Operations in live gas and oil well (including Nitrogen operations). D. Downhole Tools and Fishing Services Contractor shall be able to provide the following services for deviated and/or horizontal wells: complete set of downhole fishing equipment for drilling and completion operations (jars, overshots, die collars etc.) and qualified and experienced fishing personnel. E. Drilling Bits Services Contractor shall provide both rock and monoblock bits for application in the drilling of loosely consolidated shale and sand stone intervals in both water and non-aqueous based drilling fluid. Drilling bit performance benchmarking and end of section reports shall be issued by contractor. The bits must be suitable for rotary steerable pplication. Contractor shall provide bit engineering softwares for bit optimization. Supply shall be on a consignment basis. |
