| Reference | SDI9870P19 |
| Date | 11/27/2018 |
| Location | Asia |
| Scope | The company announces its need for supply of HDPE Lining -1,82,250 Sqm.The instruments to be supplied are as follows: - - Item 001, Laminated High Density Polyethylene (HDPE of mass 300 gram per sqm.) woven fabric (geo-membrane) for disposal of drilling effluent in the effluent pits of OIL's drilling. 81(Eighty one) nos of size 45.00 M X 50.00 M(Each) = 1,82,250 SQM. "HDPE Lining as per following specification: 1. Mass (g/m2) : 300( Tolerance positive +5% to Negative zero percent). 2. Dimensions: As declared +1% with no negative tolerance. 3. Carbon black content (%): 2.5 ± 0.5 % (Min). 4. Breaking load on 20×10 cm (Before UV exposure): 4.1 Warp way (N): 3300 (Min). 4.2 Weft way (N): 3000 (Min). 5. Breaking load on 20×10 cm (After UV exposure): 80% of the original strength found before UV exposure. 6. Strain at maximum load (%):20±5. 7. Impact failure load, at 1524 mm drop (gram force at 50): 1150 (Min). 8. Tear resistance, (N): 100 (Min). 9. Puncture resistance (N): 300 (Min). 10. Bursting resistance (Ball burst), N/cm2: 60 (Min). 11. Seam strength, N/mm: 15 (Min). 12. Hydrostatic resistance, Kg/cm2: 10 (Min)." 1.0: Laminated High Density Polyethylene (HDPE) woven fabric (geo-membrane) for disposal of drilling effluent in the effluent pits of OIL's drilling well as detailed specification given. The laminated HDPE woven fabric shall be manufactured from HDPE fabric to meet the requirement of mass 300 Grams Per Sqm (GSM). 2.0: Sl No. Property : Requirement 1. Mass : 300(g/m2)(Tolerance positive +5% with zero percent negative ). 2. Dimensions : As declared +1% with no negative tolerance. 3. Carbon black content (%) : 2.5 ± 0.5 % (Min). 4. Breaking load on 20 cm × 10 cm strip (Before UV exposure). a) Warp way : 3300 N (Min). b) Weft way : 3000 N (Min). 5. Breaking load on 20 cm × 10 cm strip (After UV exposure) : 80% of the original strength found before UV exposure. 6. Strain at maximum load (%): 20±5. 7. Impact failure load, at 1524 mm drop (gram force at 50): 1150(Min). 8. Tear resistance,: 100 N(Min). 9. Puncture resistance: 300 N(Min). 10. Bursting resistance (Ball burst),: 60 N/cm2 (Min). 11. Seam strength,: 15 N/mm (Min). 12. Hydrostatic resistance,: 10 Kg/cm2 (Min). 2.2: Total QTY as follows: 81(Eighty one) nos. of size 45M X 50 M (Each)= 1,82,250 SQM. 3..order for qty. not less than 91,125 Sq. Meters of HDPE Lining in preceding 5(five) years. |
| Bid Bond | INR 332,100.00 |
| Offer Validity | 120 days |
