| Reference | SDG9940P19/07 |
| Date | 12/3/2018 |
| Location | Asia |
| Scope | The company announces its need for Supply of Coiled Tubing Unit Spares. The Spares to be supplied are as follows: - - Item 001 Qty=2 of Knuckle Joint for Coiled tubing Size of Knuckle Joint: 1.750 Inches Size of Coiled Tubing: 1.25 Inch OD x 0.109 Inch Wall & 1.25 Inch x0.087 Inch Wall. Max OD: 1.750 Inches. Min ID: 0.500 inch. Length of tool: 9-10 Inches. Top Connection: 1 inch AMMT Box, Bottom Connection: 1 inch AMMT Pin, Working Pressure: 5000 PSI, Tensile Strength: 49000-50000 lbs. Service : Standard. Application:. The knuckle joint shall be designed to allow full 360° rotation of the tool string and provides 15° of angular deviation and internal pressure sealing throughout the full rotation of the tool. The tool will be used to provide additional flexibility in the tool-string during CT operations in deviated/J- band wells. - Item 002 Qty=2 of Nozzle with Gauge Cutter for CT application. Max OD : 1 3/4 inches. Gauge Cutter ring sizes: 2", 2 1/16", 2 1/8". 2 3/16", 2 ¼". Top Connection: 1 inch AMMT Box, Bottom Connection: 1 inch AMMT Pin, Working Pressure: 5000 PSI. Service : Standard. Accessories.1 set of gauge cutter consists of 5 detachable gauge cutter skirts of the above ring sizes 2", 2 1/16", 2 1/8". 2 3/16", 2 ¼". - Item 003 Qty=2 of CT intensifier. Size : 1 11/16 Inches. Top Connection: 1 Inch AMMT Box, Bottom Connection: 1 Inch AMMT Pin, Stroke length: 6-7 inches. Tool Length: not more than 8 feet. Working Pressure: 5000 PSI. Tensile Strength: not less than 45000 Lbs Service : Standard Application: The coiled tubing intensifier shall be straight pull-andpush jarring tool with combinations of hydraulics and mechanics. The operation of the tool shall be featured with easy and dependable operation by varying applied load only. - Item 004 Qty=2 of Flow actvtd Hyd. hvy dty rnng/pullg tool Flow activated Hydraulic heavy duty running/pulling tool for fish recovery of external fish necks. Tool Size: 2 inches. OD: 1.875 inches. Catch size range: 1 Inch-1.5 Inches. Standard catch size: 1 3/8 Inch OD fish neck. Length: 16 Inches-18 Inches. Top Connection: 1 Inch AMMT Box, Working Pressure: 5000 PSI. Differential operating pressure: 500-700 psi. Tensile strength: not less than 45000 lbs Service : Standard Accessories: Adaptor kits shall be supplied with necessary attachments to use the tool with varied catch size as mentioned above. - Item 005 Qty=2 of Field Service kit for Flow activated Hydraulic heavy duty running/pulling tool. - Item 006 Qty=2 of Repair-CT Intensifier. Repair kit for 1 11/16 inch CT intensifier as mentioned in Material Code 99050309. Item 007 Qty=2 of Coiled Tubing Jar. Size : 1 11/16 inch. Top Connection: 1 inch AMMT Box, Bottom Connection: 1 inch AMMT Pin. Stroke length: 10-12 Inches. Working Pressure: 5000 PSI. Tensile strength: Minimum 50000 lbs. Service : Standard Application: Coiled tubing (CT) jar shall a bi-directional hydraulic jarring assembly, designed for coiled tubing operations and to operate in conjunction with tubing jar intensifier. The jar shall allow for easy, dependable, and hard hitting operation, with no setting or adjustment required before going into the hole or during operation. The assembly shall allow the operator to easily control the intensity of jarring impacts by varying the applied load. Item 008 Qty=2 Repair kit-Coiled Tubing Jar Repair kit for 1 11/16" OD Coiled Tubing Jar , size 1 11/16 inch Specification as mentioned above - Item 009 Qty=2 of Heavy Duty Hydraulic Disconnect. Size : 1 11/16 Inch. OD: 1.690 Inch. ID: 0.500 Inch. Length: 18 Inches-19 Inches. Working Pressure: 5000 PSI. Top Connection: 1 Inch AMMT Box, Bottom Connection: 1 Inch AMMT Pin, Fish Neck: 1.3/8 inch GS. Maximum Temperature: 350 deg F. Tensile Strength: 50000 lbs. Service : Standard Application: The heavy duty hydraulic disconnect (HDHD) shall be designed to allow the CT tool string to detach at a predetermined point with deployment of a suitable drop/trip ball. - Item 010 Qty=2 of Heavy Duty Hydraulic Disconnect. Size : 1 11/16 Inch. OD: 1.690 Inch. ID: 0.500 Inch. Length: 18 Inches-19 Inches. Working Pressure: 5000 PSI. Top Connection: 1 Inch AMMT Box, Bottom Connection: 1 Inch AMMT Pin, Fish Neck: 1.3/8 inch GS. Maximum Temperature: 350 deg F. Tensile Strength: 50000 lbs. Service : Standard Application: The heavy duty hydraulic disconnect (HDHD) shall be designed to allow the CT tool string to detach at a predetermined point with deployment of a suitable drop/trip ball. - Item 011 Qty=2 of Roto hammer (Fluid Hammer Impact Drill Jar). Size : 1.695 Inch. OD: 1.695 Inch. Top Connection: 1 Inch AMMT Box. Bottom Connection: 1 Inch AMMT Pin, Tool operating hyd Pressure: 500 - 2,500 PSI. Maximum Temp Rating: 350 Deg F. Service : H2S. Application: The Fluid Hammer Impact Drill jar shall be designed to transmit multiple downward impact forces at high frequency when fluid is pumped through it, without the need to cycle the coiled tubing. Accessories: 1 set of the following bits with 1" AMMT box thread connection shall be supplied with the tool. 1. 1.695 Inch Chisel Point Bit (RHB). 2. 1.695 Inch Star Chisel Bit (RHB). 3. 1.695 Inch Ballistic Button Bit (RHB), 57 mm. 4. 1.695 Inch Cross Blade Bit for (RHB), 57mm. 5. 1.695 Inch Flat Blade Sand Bi. - Item 012 Qty=2 of Roto hammer (Fluid Hammer Impact Drill Jar). Size : 2.125 Inches. OD: 2.125 Inches. Top Connection: 1 1/2 Inch AMMT Box. Bottom Connection: 1 1/2 Inch AMMT Pin, Operating Pressure: 500 - 2,500 PSI. Maximum Temp Rating: 350 Deg F. Service : H2S. Application: The Fluid Hammer Impact Drill jar shall be designed to transmit multiple downward impact forces at high frequency when fluid is pumped through it, without the need to cycle the coiled tubing With 1 set of the following bits with 1" AMMT box thread connection. 1. 2.125 Inch Chisel Point Bit (RHB). 2. 2.125 Inch Star Chisel Bit (RHB). 3. 2.125 Inch Ballistic Button Bit (RHB), 57 mm. 4. 2.125 Inch Cross Blade Bit for (RHB), 57mm. 5. 2.125 Inch Flat Blade Sand Bit. - Item 013 Qty=2 of Roto hammer (Fluid Hammer Intensifier). Size : 1.695 Inch. OD: 1.695 Inch. Top Connection: 1 Inch AMMT Box. Bottom Connection: 1 Inch AMMT Pin, Tool Operating Hyd Pressure: 500 - 2,500 PSI. Maximum Temp Rating: 350 Deg F. Service : H2S. Technical Features of Intensifier shall be • Full flow through bore. • suitable for Maximized stroke Roto hammer. • Suitable for Simple redressing. • Provision for one dynamic seal. - Item 014 Qty=2 of Service kit-Roto Hammer. Size : 1.695 Inch. OD: 1.695 Inch. Service : H2S. Top Connection: 1 Inch AMMT Box. Bottom Connection: 1 Inch AMMT Pin, Operating Pressure: 500 - 2,500 PSI. Maximum Temp Rating: 350 Deg F. - Item 015 Qty=2 of Service kit-Roto Hammer. Size : 2.125 Inches. OD: 2.125 Inch. Service : H2S. Top Connection: 1 Inch AMMT Box. Bottom Connection: 1 Inch AMMT Pin, Operating Pressure: 500 - 2,500 PSI. Maximum Temp Rating: 350 Deg F. - Item 016 Qty=2 of Service kit-Roto Hammer Intensifier. OD: 1.695 Inches. Service : H2S. Top Connection: 1 Inch AMMT Box. Bottom Connection: 1 Inch AMMT Pin, Operating Pressure: 500 - 2,500 PSI. Maximum Temp Rating: 350 Deg F. - Item 017 Qty=2 of Crimping tool for 1.25 Inch OD Coiled Tubing with wheels used to swage coiled tubing Coiled tubing size: 1.25 Inch OD x0.087 Inch WT or 1.25 Inch OD x0.109 Inch WT Collapse Length of tool: Approx 16 Inches Extended Length of the tool: Approx 19 Inches. - Item 018 Qty=2 of CT Cutting tool with cutting blades Use: to part coiled tubing Coiled tubing size: 1.25 Inch OD x0.087 Inch WT or 1.25 Inch OD x0.109 Inch WT. Tool dimension: Collapse Length of tool: Approx 16 Inches. Extended Length of the tool: Approx 19 Inches. - Item 019 Qty=2 of Flow through cross over from 1 Inch CS Hydril (box) to 1 Inch AMMT (pin). OD: 1.750 Inches. ID: Minimum 0.75 Inch. Length: Max 6 Inches. - Item 020 Qty=2 of Flow through cross over from 1 Inch CS Hydril (pin) to 1 Inch AMMT (box). OD: 1.750 Inches. ID: Minimum 0.750 Inch. Length: Max 6 Inches. - Item 021 Qty=2 of Flow through cross over from 1 Inch CS Hydril (pin) to 1 Inch AMMT (box). OD: 1.750 Inches. ID: Minimum 0.750 Inch. Length: Max 6 Inches. - Item 022 Qty=2 of CT End connector Roll on x 1 Inch AMMT pin thread. CT size: 1.25 Inch CT x 0.087 Inch WT. OD of connector: 1.750 Inches. - Item 023 Qty=2 of CT End connector Roll on x 1" AMMT pin thread. CT size: 1.25 Inch CT x 0.109 Inch WT. OD of connector: 1.750 Inch. - Item 024 Qty=2of External slip end connector. External slip end connector for tensile load application. CT size: 1.25 Inch OD Coiled Tubing. Tool OD: 1.750 Inch. Pin thread: 1 Inch pin AMMT. - Item 025 Qty=2 of Extnl Cmbntion slip- CT end connctor. Tool OD: 1.750 Inch OD. External combination slip and dimple type end connector for high torque and high tensile load application. CT Size: 1.25 Inch OD Coiled Tubing. Tool OD: 1.750 Inches. Pin thread: 1 Inch pin AMMT. - Item 026 Qty=2 of External combination slip and dimple type CT end connector for high torque and high tensile load application. CT Size: 1.25 Inch OD Coiled Tubing. Tool OD: 2.125 Inches. Pin thread: 1 1/2 Inch pin AMMT. - Item 027 Qty=1 of Coiled Tubing Size:1.25" ODx0.087" WT. - Item 028 Qty=1 of Coiled tubing size: 1.25 Inch OD * 0.109 Inch WT. - Item 030 Qty=1 of Straight Bar. Size: 1-11/16 Inch. Length: 2 feet. Top connection: 1 Inch AMMT Box. Bottom Connection: 1 Inch AMMT PIN. ID: Minimum 0.75 Inch. - Item 031 Qty=1 of Straight Bar. Size: 1-11/16 Inch. Length: 3 feet. Top connection: 1 Inch AMMT Box. Bottom Connection: 1 Inch AMMT PIN. ID: Minimum 0.75 Inch. - Item 032 Qty=1 of Straight Bar. Size: 1-11/16 Inch. Length: 5 feet. Top connection: 1 Inch AMMT Box. Bottom Connection: 1 Inch AMMT PIN. ID: Minimum 0.75 Inch. - Item 033 Qty=1 of Full flow through bore Fluted Centralizer Solid one-piece construction. Size: 1-3/4 Inch. Top connection: 1 Inch AMMT Box. Bottom Connection: 1 Inch AMMT PIN. ID: Minimum 0.5 Inch. Working pressure: 5000psi. - Item 034 Qty=1 of Pull Test PlateCoiled Tubing Size: 1.25 Inch OD x 0.109 Inch Wall thickness, End Connection 1 Inch AMMT Box. - Item 035 Qty=1 of Pull Test Plate Coiled Tubing Size: 1.25 Inch OD x 0.087 Inch Wall thickness, End Connection 1 Inch AMMT Box. - Item 036 Qty=1 of Rotary Wash Tool. Nominal Size: 1- 3/4 Inch. Connection : 1 Inch AMMT Box. Lower Connection : N/A. Max OD : 1.750 Inch. Max Working Pressure: 5000psi. Length : 7.50 Inch. - Item 037 Qty=2 of Double Roll ON connector Coiled Tubing Size: 1.25 Inch ODx 0.109 Inch WT. - Item 038 Qty=2 of Field Service Kit for Double Roll on connection Coiled Tubing Size:1.25 Inch OD x 0.109 Inch WT. - Item 039 Qty=2 of Double Roll ON connector Coiled Tubing Size:1.25 Inch OD x 0.087 Inch WT. - Item 040 Qty=2 of Field Service Kit for Double Roll on connection Coiled Tubing Size:1.25 Inch OD x 0.087 Inch WT. |
| Bid Bond | INR 396,000.00 |
| Offer Validity | 120 days |
