| Reference | 3518/2019 |
| Date | 6/27/2019 |
| Location | Middle East |
| Scope | The company announces its need for supply of filed and online backman moisture analyzer explostion proof complete. - Application Moisture: catalytic reformers units, hydrogen plants. - System (analyzer & cell) to measure moisture in hydrogen on recycle gas which contains H2, CH4, C2 H6, C3H8, C4H10, 10-20PPM gas of HCL & 0-500PPM of H2O. - The analyzer, which is normally resistant when the water concentration is below 700 ppm. - Pressure inlet sample 4-24Kg/Cm2. - Sample conditioning system available for removal of acidic gas and dust. - High filters and probes. - Easy calibration with digital screen (LCD) bright (not touch). - Local calibration probe available. - Fast response and stable time: at (1 minutes or less). - Accuracy (calibration and measurement): ±0.01% of full scale. - Alarm: High and low alarm ( dual alarm). - Range scale: 0-1200 PPM. Normal: 0-250PPM. - Readout unit: moisture (PPM), temperature and dew+point (±Co). - Filter system before inlet sample. - Single vent 1/4? NPT connections, inlet and back pressure regulators, pressure gauges, bypass filter and associated hardware, all wetted parts are stainless steel. - Ambient temperature: -5 to 55 Co, the analyzer should be supplied inside enclosure, this housing should be cooling by instrument Air system. - Explosion proof Class 1, Group B, C & D Division 1. II 2G EXd&e IIC T6 Ga IP66. - Sampling system must be in rack mounted. With air instrument. - Power supply: 110 VAC, 50Hz. - Output: Bright digital readout 4-20mA. - Isolated analog, RS485, Modbus and Ethernet output available. - Any part is accepter to maintenance and replacement. - Spare parts for two years. Should be with one probe (spare part). - Equipment instructions and data book, operating manual and complete set of drawing (certified) (English language), and warranty. online analyzer "Beckman" type with a phosphoric acid cell Ametek or Dupont type. Indicator: 2 - Indicator screen installed in control room. - Signal indicator showing actual moister reading. - Signal from analyzer to screen 4-20 mA. - Scales adjustment available. - Distance from field to control room 150 meters. Portable analyzer: 3 -Portable MEECO, Mitsubishi or SHAW moisture analyzer. - Application and specification according to item 1. Moisture Cylinder: 4 - Check gas cylinder:(water PPM).(SPEC according to manufacturer). - Cylinder size : 50litter, pressure: 140 bar. - All cylinders with brass valve. Regulator: 5 -With Cylinder pressure regulator. Stainless steel 2 stage (range &capacity inlet: 400 bar, output: 0-10 bar). -Regulator connection should be matching with cylinder valve. |
| Bid Bond | US 3,000.00 |
| Bond Validity | 120 days |
| Offer Validity | 120 days |
| Documents Price | ID 250,000.00 |
