| Reference | 2020/3503 |
| Date | 3/4/2020 |
| Location | Middle East |
| Scope | The company announces its need for supply Complete horizontal screw pump (Triple Screw Foot Mounted pump) with steam turbine and base plate. - Item : pump 701 Qty 1 NOS. Spare parts for emergency maintenance shall be supply as following bellow: Set of Rotors Qty:1 NOS. Liner Qty:1 NOS. * Spare parts –complete mechanical seal QTY : 2. Description for screw pump 1.pump should be manufactured and Tested According to API 676 Latest edition except vertical. 2.pump should be Triple screw (1 power rotor and 2 Idler rotor). 3.Suction Nozzle 3" , discharge 3" (both TOP ). 4.Base plate dimension (1600* 480)mm. 5. Single mechanical seal shall be according to API 682 (pump should contain ,only one mechanical seal )and from one of the following (Join Crane ,Eagle Bergmann or flow serve ). 6.pump material preferred to be as follows Case (A106 –GrA). Rotor (A107 -1045/A536 Gr80 –ss -06). Shaft (A106 -71 ). Shaft sleeve (A314,403). 7. Bearing preferred to be Anti-friction Bearing. 8.pump should be furnished by Heating jacket (in clouding staffing box &casing). 9.Housing Bearing preferred be grease (Lubricated). 10.R.P.M for pump should be Not more than 1450. 11.pump should be furnished by relief valve external. 12.pump should furnished with replicable linear. 13.coupling should be flexible Type meta stream shall be balanced to ISO 1940 –G6.3. 14.pump Supplied with as –built three hard Copies in English document from manufactured with CD copy. 15- Activity Third party inspection (visual inspection) includes: 1. Checking of quantities. 2. Checking of packing. 3. The materials are safe from damage. 4. Review for all reports and certifies. B-QA inspection and testing including the following but not limited: Mechanical run test -materail certification required. -subsurface examination for rotor by (Ultrasonic method). -Hydrostatic test. -performance curve. 16.Certificate of Third party inspection by the following inspectors: 1-Bureau Veritas (BV). 2-LIoyds Register. 3-Intertek GIobaI. 4-TUV Rhineland. 5-SGS. 6-ATG. 7-ALROOKL. 8.RINA. 17. Certificate of origin shall be provided the manufacture and legalized by the Iraqi embassy in the country of orign: ( U.S.A. –Canada –France –Germany –Austria –Switzerland-Japan). 18 Pump and mechanical seal origin shall be from (U.S.A. –Canada –France –Germany –Austria –Switzerland-Japan). 19. three sets hard copies and one soft copy (CD) standard documentation including installation , operation and maintenance manuals in English language shall be as built (data sheet- performance curve- part list and layout contain all dimension shall be supplied). 20.packing :export wooden box suitable for outdoor storage. 21.delivery period:360 day. Operating Conditions: Liquid : Blown Asphalt. Pumping Temp : 260C°. SP.Gr at P.T :0.892. Vap press at P.T NIL Kg/cm²A. Vis at P.T : 24 - 115(max300)C.S. Capacity Rated : 0.12m³/min. Disch press : 12,0 kg /cm²G. Suct press Rated : 0.9kg/cm²G max 1.5 kg/cm²G. Diff press : 11.1 kg/cm². N.P.S.Havail : 7.0 m. N.P.S.H reqd : 3.2 m. Steam turbine driver specifications and requirements:- 1.Turbine shall be between bearing type. 2.Turbine shall be back pressured design 3.Radial bearing shall be sleeve type with anti-friction ball bearing for thrust load. 4.Governor type shall be TG -13 WOODWARD equipped with speed set screw. 5.Turbine shall be manufactured completely according to API 611 latest addition (Design, Material and test). 6.Carbon floating sealing ring for both sides. 7.Mechanical or electrical tachometer shall be provided. 8.Adequate cooler if necessary. 9.Turbine shall be designed to develop 20% of the rated power required for any specified operation for driven equipment. 10.Noise level shall be less than 85 dB at 1 meter from the turbine. 11.Turbine shall be horizontally split design. 12.Turbine inlet shall be furnished with strainer. 13.Steam condition: Inlet steam press. Max.19kg/cm2Norm.17.5kg/cm2 Min.16kg/cm2 Steam temp255C° Exhaust press 3 kg/cm². 14.Turbine manufacturer shall be: Dresser –Rand /ELLOIT. 15.Inlet (high pressure steam) from the Left side and the outlet (low pressure) from the right side viewed from governor side. |
| Bid Bond | US 6,000.00 |
| Bond Validity | 120 days |
| Offer Validity | 120 days |
| Documents Price | ID 250,000.00 |
