| Reference | SDG3951P20/06 |
| Date | 2/26/2020 |
| Location | Asia |
| Scope | The company announces its need for Procurement of Mud Motor, total Quantity:06 Nos. A) 3.1/2 INCHES (88.90 MM) OD DOWN HOLE MUD MOTOR WITH SLICK (STRAIGHT) HOUSING, MEDIUM SPEED HIGH TORQUE POWER SECTION, RUGGED BEARING PACK, SAFETY CATCH FEATURES AND DUMP VALVE ASSEMBLY, DESIGNED FOR HIGH PERFORMANCE, EXTREME DOWNHOLE OPERATIONAL ENVIRONMENTS AND SUITABLE FOR CARRYING OUT SAND CLEANING, CEMENT CLEANING AND MILLING OF BRIDGE PLUG, PACKER, JUNK, ETC., INSIDE 5.1/2 INCHES OD (20 PPF) CASING, WITH ALL ACCESSORIES AS PER THE FOLLOWING SPECIFICATIONS:- Note: Bidder to indicate Make & Model of the offered Mud Motor. QUANTITY: 06 (SIX) NUMBERS. B) PHYSICAL SPECIFICATIONS: 1) Motor OD: 3.1/2 inches (88.90 mm) 2) Lobe configuration (within): 5:6 to 7:8 3) Number of stages (within): 3.0 to 7.0 4) Overall Length (maximum): 29.5 feet (9.0 m) 5) Top connection (box): 2.7/8 inch API Regular RH 6) Bit box connection: 2.7/8 inch API Regular RH 7) Bit size range indicative (TCR & PDC): 4.1/8 inch to 5.7/8 inch/ (105 mm to 149 mm) 8) Bearing type: Mud lubricated 9) Stator Elastomer: High Performance "Hard Rubber" 10) Dump valve: Removable Dump valve assembly with 2.7/8 inch API Reg RH (Box-up x Pin-down) connection 11) Housing: Slick (straight) type housing 12) Safety catch: In-built rotor safety catch system to prevent fishing operation on a broken motor C) OPERATIONAL SPECIFICATIONS: 1) Indicative Flow rate range: 45 gpm to 250 gpm / (170 lpm to 946 lpm) 2) Indicative Operating Bit speed range at full load: 65 rpm to 350 rpm 3) Operating Differential pressure at full load (minimum): 1000 psi / (70 kg/sq cm) 4) Operating Torque at full load (minimum): 1500 ft-lbs / (2034 N-m) 5) Peak/Stall torque (minimum): 2000 ft-lbs / (2712 N-m) 6) Maximum Differential pressure at Peak/Stall torque (minimum): 1500 psi / (106 kg/sq cm) 7) Peak power output (minimum): 100 hp / (75 kw) 8) Dynamic weight on bit (minimum): 8,500 lbs / (4.3 ton) 9) Maximum Weight on bit (minimum): 13,500 lbs / (6.8 ton) 10) Working over-pull (minimum): 60,000 lbs / (30 ton) 11) Motor yield (minimum): 175,000 lbs / (87.5 ton) 12) Temperature rating (minimum): 248 deg F/ (120 deg C) 13) Working fluid: a) Salt solution: Sodium dichromate, cutch, common salt, CMC and 6000 ppm salt. b) Drilling fluid: Water base mud and KCL / NaCl mud. D) ACCESSORIES: 1) Lifting sub compatible with 2.7/8" square shoulder elevator - 01 (one) number with each motor. Total-06(six) nos. 2) Spare dump valve assembly - 01 (one) number with each motor. Total- 06 (six) nos. |
| Bid Bond | INR 411,670.00 |
| Offer Validity | 120 days |
