| Reference | SDG4160P20/07 |
| Date | 3/30/2020 |
| Location | Asia |
| Scope | The company announces its need for supply Hand Slip for 2.3/8 Inches OD Tubing. Quantity - 04 (FOUR) NUMBERS Each Rotary hand slip should be manufactured and monogrammed strictly as per API 7K (latest edition). Each Rotary hand slip should consist of, but not limited to: 1) Rotary hand slip 88.90 mm (3.1/2 inches) Body complete with Elastomer Flex handles & inserts for 60.32 mm (2.3/8 inches) OD tubing. Hand slip should have an API taper of 4 inch/ft. & suitable for use in 27.1/2 inches Square drive Rotary Table. 2) Minimum Load bearing capacity of the Rotary Hand Slip should be not less than 150 Ton. 3) The supporting slips should have minimum 11 inches (279.40 mm) gripping length. 4) The slips should be manufactured from high quality alloy steel; fully heat treated and should strictly conform to API 7K (latest edition). 5) Mass Slip weight i.e. weight of the complete slip with inserts and handles should be within 150 pounds (Maximum) 6) Extra set of Inserts for each slip - 2 Set (Total 08 Sets). 7) Extra Elastomer Flex Handle for each slip - 2 Numbers (Total 08 Nos). B. SPECIAL REQUIREMENTS: 1) SR-1 Proof Load Test: The items (HAND SLIP FOR 2.3/8 INCHES OD TUBING) shall be given a proof load test and subsequently examined in accordance with 8.6 and should be marked "SR-1" accordingly near the load rating identification (API Specification 7K – Annex A.2). Test reports should be submitted along with the supply. 2) SR-3 Data Book: The Manufacturer’s Data Book as per API Specification 7K – Annex A.5 for all of the items should be submitted along with the supply. |
| Bid Bond | INR 38,500.00 |
| Offer Validity | 90 days |
